Liquid Cement Applicator 1 oz Carded

This is a strong liquid cement. You cut the plastic tip off, which allows you to adjust the size of whole you want. It includes to small wires to clear dried cement in the tip. This is much better than the old fashioned tube, which would get all over the place. Also, the applicator stands on its own preventing cement from leaking out of the tip when the cap is off. Well designed product.

I love this glue it is so good and have used it for years no joke I have built 16 models with it and still have glue left so it last a long time it sticks good and keeps a good hold on your plastics and doesn't normally come apart providing you use enough glue in the appropriate areas not only does it have a good bond though it also has this very thin metal needle that gets into small spaces with no problems and will prevent a lot of headaches it does last a while however with this glue I point the tip touching the ground cause if I have it standing up the glue dry in the thin needle it happened to me twice and never happened when the needle was touching/ facing the ground and when the glue drys up you have 4 options 1. throw it away 2. try to get a thinner needle down the tube and break it up 3. cut of the needle where the glue is dry 4. burn the needle and let the needle catch fire until the dry glue is not there however I don't recommend that option I did it and almost caught the whole thing on fire PROS: holds a tight bond, has a nice thin needle for small spaces, lasts a while, doesn't really come apart CONS: can peel off paint, glue gets stuck in the needle sometimes if you are looking at glue this and the Tamiya 40ml brush glue are two good side kicks to have when you are building model kits highly recommend this glue

This is perfect. Cut a small amount off the tip and use as you want. Don't need much though. I remember using the tubes and you get so much waste. Not with this. Sometimes it takes a minute for the glue to work it's way to the tip but still better than the old tubes.