Model Master Burnt Iron No Buff Metallic 1/2 oz

This is a 1/2 oz (15ml) jar of Burnt Iron (Non-Buffing Metalizer) Metalizer Lacquer For Airbrush Only.

Testors Model Master Burnt Iron No Buff Metallic 1/2 oz Hobby and Model Lacquer Paint #1424
 Testors # tes1424
$3.97
DISCONTINUED
 
Retail $4.74  SAVE 16% !
Testors Item # tes1424
Features :
  • Metalizer is a unique metalizing "plate" finish, especially formulated for plastic models.
  • Metalizer system consists of a wide range of buffing and non-buffing 1/2 oz colors which will allow the modeler to duplicate virtually
  • any natural metal finish.
  • Jar can be attached and used with most airbrush systems.
Out of Stock
Discontinued - No longer available for purchase
Website security verified by GoDaddy.

Spotlight Review

 
"Burnt iron"
onbrothers23
Love this color! Good color to use on jet exhaust just make sure you mix it very well, even works good when applying with a paint brush.

You Might Also Like

← Swipe To View More →

Features

  • Metalizer is a unique metalizing "plate" finish, especially formulated for plastic models.
  • Metalizer system consists of a wide range of buffing and non-buffing 1/2 oz colors which will allow the modeler to duplicate virtually
  • any natural metal finish.
  • Jar can be attached and used with most airbrush systems.

Specs

  • Testors Product Number: 1424

Includes

  • One 1/2 oz (15ml) jar of Burnt Iron (Non-Buffing Metalizer)
  • Metalizer Lacquer

Requirements & Suggestions

  • Eye, Lung and Skin protection.
  • Testors #1409 Metalizer Sealer to go over paint and decaling.
  • Testors #1419 Metalizer Thinner to clean airbrush.
← Swipe To View More →

Reviews

  
 
"Goes on nicely"
endot800 (Los Angeles)
Unfortunately this paint has been discontinued but if you find it, buy it as it goes on really nice.

Comments

  • Keep out of reach of children.
  • Contains Butyl Acetate.
  • Highly Flammable Paint, avoid heat, sparks or open flame.
  • Avoid eye contact, skin contact or prolonged breathing of vapors, best to use in a well-ventilated area.
  • Warning: This product contains a chemical known to The State of California to cause birth defects or other reproductive harm.
  • Inhaling contents is harmful to respiratory tract and nervous system.
  • To use. Stir well. Airbrush light mist coats. Drys to touch in 30 minutes. Decal as usual. Seal with #1409 Sealer. Clean
  • airbrush with #1419 Thinner.
  • For Buffing, wait until after 10 minutes dry.
  • Recommended for ages 8 and over.

Others Also Ordererd

← Swipe To View More →