Model Master Gray Sandable Lacquer Primer 1/2 oz

• Flammable and toxic.
• Will sand well both wet and dry, but wet sanding products fine results.
• Sand with very fine sandpaper (TESR1102 or TESR1212 Sanding Films).
• Coarse sandpaper will scratch the surface.
• Recoat, once fully dry - 20 minutes under normal conditions.
• Primer is a lacquer so it is self dissolving.
• Builds a bonding coat to both the plastic below and paint above.
• Can be used under all Testor/Model Master/Floquil and PollyScal Acrylics, Enamels or Lacquers.
• Can be used on plastic, white metal, metal, resin, contour putty an other fillers.
• Not recommended for highly porous surfaces.
• When airbrushing use High Flow Nozzle 9306C at 20 PSI or less.

• Testors Product Number: 2781

One 1/2oz (14.7ml) Flat Gray Sandable Lacquer Primer