Keep calm ... Hobby on. Please be patient during this time. We are open, but orders may be delayed unexpectedly.
 > Building Supplies > Paints > Enamel : Testors Spray Dullcote 3 oz tes1260

Spray Dullcote 3 oz

This is a 3 oz. (85 g) can of Clear Flat Lacquer Overcoat Spray Paint.

Testors Spray Dullcote 3 oz Hobby and Model Enamel Paint #1260
 Testors # tes1260
$5.20
DISCONTINUED
 
Retail $6.20  SAVE 16% !
Testors Item # tes1260
Specifications :
  • Testors Product Number: 1260
Out of Stock
Discontinued - No longer available for purchase
Trust 1000's of Reviews on Hobbylinc.com
Industry Leading Loyalty Program
Buy - Earn - Save
Website security verified by GoDaddy.
Easy, Quick and Hassle Free Returns for 30 Days
Sign-Up for Specials, Coupons, & More

Spotlight Review

 
"Testors Dullcote"
mooniemac2000
This product is great when trying to make a model weathered and dirty. Remember to use primer because this is lacquer. For example, a glossy plane will not be glossy anymore if you spray the dullcote.

You Might Also Like

← Swipe To View More →

Features

  • This is flammable and toxic.
  • Can be used for
  • models, ceramic, plastics, leather, stone, metal, styrofoam,
  • crafts, wax, glass, paper, figures, fabric, wood and touching
  • up purposes.
  • Not suitable for polyethylene or vinyl.
  • Contains no lead or harmful CFC'S.
  • Easy-to-hold can.
  • Does not exceed 95% VOC by weight.

Specs

  • Testors Product Number: 1260

Includes

One 3 oz. (85 g) Can of Clear Flat Lacquer Overcoat


Requirements & Suggestions

Eye, Lung and Skin protection.

← Swipe To View More →

Reviews

  View All Reviews
 
"Dull or Matte Finish at it's Best"
davidnweber (Del Rio, Tx)
After trying numerous products (including Krylon and others), I finally found a ready spray product that does not frost the finished product. Although heavy in fumes & odor, this product was what I needed for finishing a model in a flat or matte coat.

 
"Best flat available hands down"
nscrfns (Killeen, TX)
If used properly this will create a very nice flat finish. I haven't found anything that produces as flat a finish than Dullcote. I've used this over lacquers, enamels and acrylics. Several mist coats until the desired flatness is achieved. My best results are when I have decanted this and sprayed it through an airbrush without thinning further. The spray can nozzle puts out too much paint in my opinion. Don't get too close to your subject to help avoid pooling and/or runs. If sprayed too heavy it can leave a milky white finish. If sprayed over clear acrylics such as Model Masters or Alclad Aqua Gloss, several mist coats is best. Anything heavier than a mist will tend to attack the acrylic clear and result in a wrinkled finish. It doesn't do this with any colored acrylic paints. Allow 10-15 minutes to dry between mist coats. As always experiment on a test piece first.

 
"Very dependable matte coat."
jen (Atlanta, GA)
I use this for a flat finish and protective coat on scale models and wargame miniatures. Dullcote performs well in a wider temperature and humidity range than any other spray sealer I've tried. Multiple light coats are better than one heavy coat; if over-applied, it can, on rare occasions, dry with whitish residue in crevices and recesses. Smells dreadful, but it should be used only with good ventilation, anyway.

Comments

  • Keep out of reach of children.
  • Highly Flammable Paint, avoid heat, flame or puncturing can.
  • Avoid eye contact, skin contact or prolonged breathing of vapors, best to use in a well-ventilated area.
  • Inhaling contents is harmful to respiratory tract and nervous system.
  • Product has chemical known to cause birth defects and other reproductive harm in the state of California.
  • Shake can vigorously before using, reshake often and use at room temperature.
  • For best desired results, test product first.
  • Spray with even strokes and do not stop painting in the middle, for the best results.
  • To avoid wrinkling, recoat within 3 hours or after 48 hours.
  • To clear valve after use, invert can and spray several seconds, if nozzle clogs, clean with thinner.

Others Also Ordererd

← Swipe To View More →
Savings - Selection - Service
All
All Hobbylinc
Models
Trains
Rockets
Supplies
Arts/Craft
Books
Diecast
FreeFlight
Science
Slotcar
Toys
Woodboat
Account
Share
Cart
tracker