This is a rubber band powered model of the Hughes 1B Racer from Dumas Aircraft. Features: * Hand selected balsa parts. * Precision laser cut parts. * Color peel and stick decal set. * Vacuum molded plastic parts. * Full size plans with step by step instuctions. * Lightweight colored tissue (grey and blue in color). * F.A.I. Tan II contest rubber.
...more about the Dumas 1B Hughes Racer 24''
|
This is a Walnut scale, Rubber-Powered, Pitts Special S-1 from Dumas. For Beginners Learning How To Build & Fly or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 120 Laser-Cut Parts and Hand Selected Balsa Light-Weight Colored Tissue Paper Covering Color Peel-And-Stick Decal Set Full Size Plan and Step-By-Step Instructions 5" Plastic Propeller Vacuum Molded Parts FAI Tan II Contest Rubber Bands.
...more about the Dumas Pitts Special S-1
|
This is a Walnut scale, Rubber-Powered, SBD-5 Dauntless Model from Dumas. For Beginners Learning How To Build & Fly or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 80 Laser-Cut Parts and Hand Selected Balsa Light-Weight Colored Tissue Paper Covering Color Peel-And-Stick Decal Set Full Size Plan and Step-By-Step Instructions 5" Plastic Propeller Vacuum Molded Parts FAI Tan II Contest Rubber Bands.
...more about the Dumas SBD-5 Dauntless
|
|
|
|
|
This is a Walnut scale, Rubber-Powered, Piper Cub Coupe Free Flight Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 60 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Red and White Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Cowling and Clear Plastic Windshield Sheet. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller
...more about the Dumas Piper Cub Coupe 17.5''
|
T-34 17.5'' by Dumas
|
| $21.95 $15.89
(27% off) |
Product Number
dum204 |
Availability
In Stock |
This is a Walnut scale, Rubber-Powered, T-34 Mentor Free Flight Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 50 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Red and White Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Clear Plastic Cowling and Windshield Sheet. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller Shaf
...more about the Dumas T-34 17.5''
|
This is a Walnut scale, Rubber-Powered, F-4F Wildcat Free Flight Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 70 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Gray Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Cowling and Bombs with Clear Plastic Canopy. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller Shaft.
...more about the Dumas F-4F Wildcat 17.5''
|
This is a Walnut scale, Rubber-Powered, Tiger Moth Free Flight Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 90 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Yellow Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Cowling. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller Shaft. * This is a bi-wing airplane.
...more about the Dumas Tiger Moth 17.5''
|
This is a Walnut scale, Rubber-Powered, Spirit of St. Louis Free Flight Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 50 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Gray Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Cowling. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller Shaft. * This is a high-wing airplane.
...more about the Dumas Spirit of St. Louis 17.5''
|
This is the Dumas Ford Tri-Motor Walnut Scale Rubber Powered Flying Model Airplane. Features: * Simple rubber band power, just wind propeller and hand launch into the wind. * Hand selected laser cut balsa and vacuum molded plastic parts. * Full size plans make building easy for beginning modelers.
...more about the Dumas Ford Tri-Motor 17.5''
|
This is the Dumas Skymaster Walnut Scale Rubber Powered Flying Model Airplane. Features: * Simple rubber band power, just wind propeller and hand launch into the wind. * Hand selected laser cut balsa and vacuum molded plastic parts. * Full size plans make building easy for beginning modelers.
...more about the Dumas Skymaster 17.5''
|
This is the Dumas A6M3 Zero Walnut Scale Rubber Powered Flying Model Airplane. Features: * Simple rubber band power, just wind propeller and hand launch into the wind. * Hand selected laser cut balsa and vacuum molded plastic parts. * Full size plans make building easy for beginning modelers.
...more about the Dumas A6M3 Zero 17.5''
|
This is the F4U Corsair Rubber-Powered Free-Flight Airplane from Dumas. This is a walnut scale airplane. Features: * Simple, built-up Balsa construction. * Hand-selected balsa. * 70 Laser-cut parts. * FAI Tan II contest rubber. * Vacuum molded parts. * Color peel and stick decal set. * Lightweight blue colored tissue. * Clear canopy.
...more about the Dumas Corsair 17.5''
|
This is the Staggerwing Biplane Rubber-Powered Free-Flight Airplane from Dumas. This is a walnut scale airplane. Features: * Simple, built-up Balsa construction. * Hand-selected balsa. * 110 Laser-cut parts. * FAI Tan II contest rubber. * Vacuum molded parts. * Color peel and stick decal set. * Lightweight red colored tissue. * Clear windshield sheet.
...more about the Dumas Staggerwing 17.5''
|
This is a Walnut scale, Rubber-Powered, P-51B Mustang Free Flight Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 40 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Gray, Green and White Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Plastic Cowling, Exhuast and Canopy. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller S
...more about the Dumas P-51B Mustang 17.5''
|
This is a Walnut scale, Rubber-Powered, Curtiss P-6E Free Flight Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 70 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Yellow and Green Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Plastic Cowling and Engine Exhaust Sheet. * Flat Plastic Window Sheet. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wir
...more about the Dumas Curtiss P-6E Hawk 17.5''
|
This is a Dumas Rubber-Powered, Fokker Eindecker E III Flying Scale Model. Features: * "Stick and Tissue" construction (many small sticks glued together to form the airplane and then the frame is covered with tissue paper). * Over 60 laser-cut parts and hand selected balsa. * Lightweight white tissue paper covering. * Color peel-and-stick decal set. * Full size plan and step-by-step instructions. * Plastic propeller, tailwheel and 2-two-piece wheels. * Vacuum-formed plastic cowling, wheel pants and clear plastic windshield sheet. * F.A.I. tan II contest rubber bands. * Un-bent landing gear wire and pre-hooked propeller shaft.
...more about the Dumas Fokker E111 17.5''
|
This is a Dumas Rubber-Powered, P-26 Peashooter Flying Scale Model. Features: * "Stick and Tissue" construction (many small sticks glued together to form the airplane and then the frame is covered with tissue paper). * Over 100 laser-cut parts and hand selected balsa. * Lightweight white tissue paper covering. * Color peel-and-stick decal set. * Full size plan and step-by-step instructions. * Plastic propeller, tailwheel and 2-two-piece wheels. * Vacuum-formed plastic cowling, wheel pants and clear plastic windshield sheet. * F.A.I. tan II contest rubber bands. * Un-bent landing gear wire and pre-hooked propeller shaft.
...more about the Dumas P-26 Peashooter 17.5''
|
This is a Dumas Rubber-Powered, Fairchild PT-19 Flying Scale Model. Features: * "Stick and Tissue" construction (many small sticks glued together to form the airplane and then the frame is covered with tissue paper). * Over 60 laser-cut parts and hand selected balsa. * Lightweight white tissue paper covering. * Color peel-and-stick decal set. * Full size plan and step-by-step instructions. * Plastic propeller, tailwheel and 2-two-piece wheels. * Vacuum-formed plastic cowling, wheel pants and clear plastic windshield sheet. * F.A.I. tan II contest rubber bands. * Un-bent landing gear wire and pre-hooked propeller shaft.
...more about the Dumas Fairchild PT-19 17.5''
|
This is a Walnut scale, Rubber-Powered, Messerschmitt ME-109G from Dumas. For Beginners Learning How To Build & Fly or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 80 Laser-Cut Parts and Hand Selected Balsa Light-Weight Colored Tissue Paper Covering Color Peel-And-Stick Decal Set Full Size Plan and Step-By-Step Instructions 5" Plastic Propeller Vacuum Molded Parts FAI Tan II Contest Rubber Bands.
...more about the Dumas Messerschmitt ME109 G
|
This is a Walnut scale, Rubber-Powered, Ryan M-1 Mail Transport Model from Dumas. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 90 Laser-Cut Parts and Hand Selected Balsa Light-Weight Colored Tissue Paper Covering Color Peel-And-Stick Decal Set Full Size Plan and Step-By-Step Instructions 5" Plastic Propeller Vacuum Molded Parts FAI Tan II Contest Rubber Bands.
...more about the Dumas Ryan M-1 Mail Transport
|
Waco YMF-5 by Dumas
|
| $37.95 $27.49
(27% off) |
Product Number
dum227 |
Availability
In Stock |
This is a Walnut scale, Rubber-Powered, Waco YMF-5 from Dumas. For Beginners Learning How To Build & Fly or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 130 Laser-Cut Parts and Hand Selected Balsa Light-Weight Colored Tissue Paper Covering Color Peel-And-Stick Decal Set Full Size Plan and Step-By-Step Instructions 5" Plastic Propeller Vacuum Molded Parts FAI Tan II Contest Rubber Bands.
...more about the Dumas Waco YMF-5
|
This is a 30" Wingspan-Scale, Rubber-Powered, Gee Bee Model E Flying Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 70 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Red & White Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller and 2-Two-Piece Wheels. * Clear Plastic Canopy & Vacuum-Formed Cockpit, Cowling & Wheel Pants. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller S
...more about the Dumas Gee Bee Model E 30''
|
This is a 30" Wingspan-Scale, Rubber-Powered, MR Mulligan Flying Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 75 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight White Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Plastic Cowling, Wheel Pants and Clear Plastic Windshield Sheet. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked
...more about the Dumas Mr Mulligan 30''
|
This is the Curtiss SBC-3 Helldiver Rubber Powered Flying Model from Dumas. For Beginners Learning How To Build & Fly or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 130 Laser-Cut Parts and Hand Selected Balsa Light-Weight Colored Tissue Paper Covering Color Peel-And-Stick Decal Set Full Size Plan and Step-By-Step Instructions Plastic Propeller Vacuum Molded Parts FAI Tan II Contest Rubber Bands.
...more about the Dumas Curtiss SBC3 Helldiver 30''
|
This is a 30" Wingspan-Scale, Rubber-Powered, DH C-2 Beaver Flying Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 80 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Yellow Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Cowling and Clear Plastic Windshield Sheet. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller Shaft.
...more about the Dumas DH C-2 Beaver
|
This is a 30" Wingspan-Scale, Rubber-Powered, Fieseler 156 Stork Flying Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 90 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Gray Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller and 2-Two-Piece Wheels. * Vacuum-Formed Clear Plastic Canopy, Cowling, Exhausts and Windows. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller Shaft.
...more about the Dumas Fieseler 156 Stork
|
This is a 30" Wingspan-Scale, Rubber-Powered, F8F-2 Bearcat Flying Model. For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 110 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Dark Blue Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Clear Plastic Canopy, Cowling and Exhausts. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller Shaf
...more about the Dumas F8F-2 Bearcat
|
