Hand Tools

This is a 1/8" Shank Mini Adapter Chuck from Gyros Products. Features: * The dynamically balanced, compact and streamlined design of the Gyros Mini Chuck allows it to spin true and vibration-free even at. * 30,000 rpm. * The shank and collet are precision machined from a single steel billet, thus ensuring optimum concentricity and balance. * The chuck has a collet capacity of 0"-.0390" (sizes #61-#80). This makes the task of centering these tiny drill bits in a hand or. * electric drill simple and easy. * The integral collet design allows your drill bit to spin true, thus avoiding tool wear. * 1/8" shank. * Can be run at 30,000 rpm. * Carded packaging.
...more about the Gyros Products Co Mini Chuck w/1/8'' Shank

This is a PIN VISE (Pocket Drill) w/1/16" Collet and Six Bits that conveniently are stored in the knurled handle with shirt pocket clip.
...more about the Hobbico Pin Vise 1/16'' Collet w/6 Bits

This is a Small Hand Held Manual Drill that Resembles a Pen with a Collet for Drill Bits in One End, and a Removable Cap to Hold Drill Bits in the Other. Features: * Steel construction (natural metal color). * Retainer clip for holding onto pockets. * Adjustable collets to hold many bits, numbers 30-51.
...more about the Hobbico Pin Vise 1/8'' Collet w/3 Bits

This is the Hobbico Servo Horn (Arm) Drill. Features: * Great for making holes in airplane servo horns. * Makes non-tapered holes for a perfect fit. * 2-3/4" total length with knurled aluminum handle. * Small size great for tight spaces.
...more about the Hobbico Servo Horn Drill

This is a 3/16" Extended Drill Bit from Higley. Features: * Extended drill bits have a normal high speed drill bit set into a steel rod that is slightly larger in diameter than the drill bit. * Reaches up to 14" into your model. * Great for putting in a forgotten hole. * Drills holes for 8-32 screw applications.
...more about the Harry B. Higley Extended Drill 3/16''

This is a 5/32" Extended Drill Bit from Higley. Features: * Extended drill bits have a normal high speed drill bit set into a steel rod that is slightly larger in diameter than the drill bit. * Reaches up to 14" into your model. * Great for putting in a forgotten hole. * Drills holes for 6-32 screw applications.
...more about the Harry B. Higley Extended Drill 5/32''

This is a Modeler's Tap Hammer from Latina. Features: * Silver metal hammer. * Black plastic handle. * Carded packaging.
...more about the Latina Modeller's Tap Hammer

This is the Nail Nailer from Latina. Features: * Used for model railroads and model ship building. * Insert the nail into the nailer and push slightly onto the surface to be nailed. * Nailer helps to avoid damaging delicate surfaces. * Black wooden handle with a metal tip. * Magnetized post. * Adjustable spring loaded shaft. * Does not include nails.
...more about the Latina Nail Nailer

This is the Robart 1/4" Drill Jig Bushing. Features: Constructed of steel and serrated for sure grip Threads into the Hinge Point Drill Jig to guide the drilling of mounting holes for the #317 (ROBQ0317) and #318 (ROBQ0318) Super Hinge Point Pockets.
...more about the Robart Drill Jig Bushing

This is the Squadron Tools Drill Bit Index with sizes 61-80 Drill Bits. Features: * Plastic holder dispenses tiny drill bits, simply tilt to remove bit. * Hole for convenient hanging on pegboard in shop area.
...more about the Squadron/Signal Drill Bit #61-80 (20)

This is a Basic Drill Bit Set from Tamiya. Features: * Metal drill bits. * 1mm, 1.5mm, 2mm, 2.5mm and 3mm drill bits. * Plastic storage case.
...more about the Tamiya Basic Drill Set

This is the 0.3mm Fine Drill Bit from Tamiya. Features: Steel construction.
...more about the Tamiya Fine Drill Bit 0.3mm

This is the 0.4mm Fine Drill Bit from Tamiya. Features: Steel construction.
...more about the Tamiya Fine Drill Bit 0.4mm

This is the 0.5mm Fine Drill Bit from Tamiya. Features: Steel construction.
...more about the Tamiya Fine Drill Bit 0.5mm

This is a Model Master Pin Vise with Six Drill Bits from Testors. Features: * Pin Vise is nickel-plated and has two tempered-steel, reversible chucks (four opening diameters). * Pin Vise can be used wherever small holes or openings are required (e.g. exhaust pipes, gun barrels, locating holes and many other. * fine detailing and scratch-building operations. * Chucks take all twist drill bits up to .10" (2.5mm). * Comes in a carded package.
...more about the Testors Pin Vise w/6 Drill Bits

The Set includes Drill bits #61-#81. These fine point drills are used for building models. The stand has a plastic cover for easy storage.
...more about the X-acto Drill Set w/Stand (20)

This is a Spiral Hand Drill from Zona Tool Co. Features: * Spiral or archemedian style hand drill for use with small wire size drill bits from #80 to #70. * Push ring down to turn drill. * Spring return makes drilling easier and faster. * Carded packaging.
...more about the Zona Tool Co. Spiral Hand Drill & Spring

This Is A Hinge Point Drill Jig from Robart. Features: * Guides and drills mounting holes for hinge points. * Adjustable for all control surfaces. * It's made of hardened steel. * Incorporates removable drill bushings. * Instructions provided.
...more about the Robart (bulk of 4) Hinge Point Drill Jig