Building Supplies

TOP FLITE SUPREME MICRO-BALLOON FILLER is ideal for thinning epoxy and poly- ester resins to make fillets or repairing surface imperfections. The ratio of microballoons to epoxy is a three-to-one mixture. Features: * Ultra-light extender makes epoxy or polyester resins lighter and more sandable. * Great for joints and fillets, or surfacing over imperfections in wood grain or in fiberglass cloth. * Convenient spout offers easy, no-waste pouring for clean,no mess use. * Compatible with aliphatic resins and acetone based glues.
...more about the Top Flite Microballoons Filler 8 oz

This is a 2.5 Oz. Tube of Green Putty from Squadron Tools. Features: * Fine grained Green filler.. * Ideal for filling seams, sink holes and recontouring.. * Dries hard, has little shrinkage and sands smooth.. * Easy to paint over without primer.. * Carded packaging..
...more about the Squadron/Signal Green Putty Carded 2.5 oz

This Display Box contains 12 Squadron White Putty tubes. Features: * Fast drying! Apply to area desired and allow 30 minutes for drying.. * Easily files or sands to desired shape. * Long life. * Putty is White. * Bonds to styrene. * Great for filling seams and cracks. * The perfect hobby filler for planes, ships, cars, figures, armor, and trucks.. * Box easily conforms into a counter display.
...more about the Squadron/Signal White Putty w/Display (12)

This is a 2.5 Oz. Tube of White Putty from Squadron Tools. Features: * Fine grained White filler.. * Ideal for filling seams, sink holes and recontouring.. * Dries hard, has little shrinkage and sands smooth.. * Easy to paint over without primer.. * Carded packaging..
...more about the Squadron/Signal White Putty Carded 2.5 oz

This is the Tamiya Light Curing Putty. Features: Great for filling gaps and dents on plastic models One part putty requires no mixing Cures in one minute under direct sunlight or 2 minutes under fluorescent light (will not cure under UV or incandescent light) Almost no shrinkage when drying Excellent workability after curing makes cutting, sanding and filing a breeze Easily painted with paints designed for plastic models.
...more about the Tamiya Light-Curing Putty 34 g

This is a 5/8 Oz. Tube of Contour Putty from Testors. Features: * Use for filling seams and customizing plastic models. * Allow to dry and work to final contour with knife and sandpaper.
...more about the Testors Plastic Putty 5/8 oz

This is a White Colored Filler for filling gaps in the wood of an aircraft fuselage, wing, or tail section before covering is applied for smoother finishes. Features: * Ready-to-Use, no preperation or mixing is required. * Filler is very easy to sand, so even sloppy applications can be smoothed for a very nice looking finish.
...more about the Hobbico HobbyLite Filler White 8 oz

This is a Balsa Colored Filler for filling gaps in the wood of an aircraft fuselage, wing, or tail section before covering is applied for smoother finishes. Features: * Balsa colored filler helps in hiding the filler applied when covering. (White filler shows up through the covering very well, and may appear to have spots.). * Ready-to-Use, no preparation or mixing is required. * Filler is very easy to sand, so even sloppy applications can be smoothed for a very nice looking finish.
...more about the Hobbico HobbyLite Filler Balsa 8 oz

This is a 4 oz bottle of milled fiberglass that is used to strengthen epoxy bonds. It is mixed with epoxy glue at a ratio of 1/4 to 1/2 teaspoon per ounce of epoxy. (ratio verified w/product manager KB 4/00). Features: * Increases the strength of any epoxy. * Perfect for adding strength to firewalls, wing hold-down blocks, landing gear blocks. * Easy to use. * Can be smoothed over with isopropyl alcohol for a sleek finish.
...more about the Great Planes Milled Fiberglass