|
|
Plastic Models → Parts/Acc. → Vehicle Tire & Wheel
|
Dress Up Any Model Car by Adding These Triple Gold DZ Rims with Whitewall Tires from Pegasus. Features: * Turn any ordinary plastic model into a showpiece. * Fits all 1/24 - 1/25 scale plastic models, when properly assembled. * Includes four wheels with tires. * Rubber whitewall tires with realistic tread. * Gold wire spoke rims. * Pre-assembled, ready for show.
...more about the Pegasus Hobbies 1/24-1/25 Trpl Gold DZ's w/Whtwall
|
Dress up any Model Car by adding these Gold Face DZ Rims with Whitewall Tires from Pegasus. Features: * Turn any ordinary plastic model into a showpiece. * Fits all 1/24 - 1/25 scale plastic models, when properly assembled. * Includes four wheels with tires. * Rubber whitewall tires with realistic tread. * Gold outer rims with chrome wire spokes. * Pre-assembled, ready for show.
...more about the Pegasus Hobbies 1/24-1/25 Gold Face DZ's w/Whtwall
|
Just finished building, customizing and painting your 1/25-1/20 scale plastic model? Now, what are you going to use for rims and tires? Ditch the stock sets and try the PEGASUS wide chrome wire wheels with low profile tires. Features: * Deep dish, wide chrome wire wheel (plastic). * Gold three-bladed spinners (knockoffs). * Rubber, treaded low profile tires.
...more about the Pegasus Hobbies Wide Chrome Rims/Lo Profile Tires
|
Did you just finish building, painting and customizing your 1/24-1/25 scale plastic model? What are you going to use for rims? Ditch the stock rim set that came with your model, and upgrade! These rims come packed four to a set. Features: * Four chrome Tri-blade rims. (they are a three swept spoke design-. * They look like the blades of a fan with "fluted" edges.). * These rims are a wide rim with standard offset. * Four rubber treaded tires.
...more about the Pegasus Hobbies Tri-Blade Chrome Rims w/Tires
|
If you are a model builder like myself, then you want your finished model to be as unique as you are. Pegasus Hobbies has developed a line of plastic model accessories to fit 1/25-1/24 scale models to aid in your customizing efforts. This is a Full Set of Four Rims and Tires from this series. Features: * Will work on most 1/25-1/24 scale plastic model kits. * Real rubber treaded tires premounted on chrome plated rims. * "Daggars" design is a twin 3-spoke with an inlaid 3-bladed knockoff. * Rims can mount with a short piece of wire to act as an axle, or they. * can glue directly to the spindles on the model.
...more about the Pegasus Hobbies 1/24-1/25 Daggars Chrome Rim/Tires
|
Dress Up Any Model Car by Adding These Chrome Diablo Rims with Tires from Pegasus. Features: * Turn any ordinary plastic model into a showpiece. * Fits all 1/24 - 1/25 scale plastic models, when properly assembled. * Includes four wheels with tires. * Rubber tires with realistic tread. * Chrome wheels have three spokes in a swirled pattern alternating with pointed dagger-like projections. * Pre-assembled, ready for show.
...more about the Pegasus Hobbies Chrome Diablo's
|
|
|
Dress Up Any Model Car by Adding These 19" Chrome DZ Rims with Lo-Pro Tires from Pegasus. Features: * Turn any ordinary plastic model into a showpiece. * Fits all 1/24 - 1/25 scale plastic models, when properly assembled. * Includes four wheels with tires. * Rubber tires with realistic tread. * Chrome wire spoke rims. * Pre-assembled, ready for show.
...more about the Pegasus Hobbies 1/24-1/25 Chrme 19'' DZ's w/Lo Pro Tres
|
Dress Up Any 1/18 Scale Model Car by Adding These Chrome D's Rims with Lowpro Whitewall Tires from Pegasus. Features: * Turn any ordinary plastic model into a showpiece. * Fits all 1/18 scale plastic models, when properly assembled. * Includes four wheels with tires. * Rubber whitewall tires with realistic tread. * Chrome wire spoke wheels. * Pre-assembled, ready for show.
...more about the Pegasus Hobbies 1/18 Low Profile Whitewall Chrome
|
|
|
|
These are Chrome 23" DZ's Wheels with Tires by Pegasus Hobbies. Suitable for Ages 8 & Older. Features: * Chrome wire spoke wheels with separate chrome knock offs. * Rubber tires with authentic tread design. * Designed for use on 1:25 scale model vehicles. * Made in the USA.
...more about the Pegasus Hobbies 23'' DZ's Chrome
|
These are Chrome 23" T's Wheels with Tires by Pegasus Hobbies. Suitable for Ages 8 & Older. Features: * Chrome 5-spoke wheels. * Rubber tires with authentic tread design. * Designed for use on 1:25 scale model vehicles. * Made in the USA.
...more about the Pegasus Hobbies T's w/Tires 23'' Chrome
|
|
|
|
|
|
|
|
These are 23" Polished Aluminum Stepped Sleeves Wheels with Tires by Pegasus Hobbies. Suitable for Ages 8 & Older. Features: * Polished aluminum stepped wheel sleeves. * Mounted, thin rubber tires with authentic tread design. * Designed for use on 1:25 scale model vehicles. * Made in the USA.
...more about the Pegasus Hobbies Sleeves 23'' Stepped Alum Polished
|
|
|
Plastic Models → Parts/Acc. → Vehicle Accessories
|
This is Model Master Dark Gray Simulated Carpeting from Testors. Features: * Adds realism to model car interiors - floors, mats, roof liners, and trunks. * Adds easily to cemented areas on carpet, where modelers wish to add simulated carpet; follow simple instructions. * Dark gray carpet is highly realistic and comes in a carded package.
...more about the Testors (bulk of 6) Interior Flocking Dark Gray
|
|
This is a 1/24 - 1/25 Scale Red Wired Distributor Kit from Detail Master. It's for advanced modelers. Features: * Highly realistic parts that are easy to assemble by following careful directions. * Includes distributor body with cap clips, drive shaft, ignition wire, wire boots, wire looms, and hex shapes for plugs. * Red wire, black plug boot wire, and photo-etched parts included. * Detailed and clear instructions included for wired distributors.
...more about the Detail Master R/C Wired Distributor Kit Red
|
This is a Package of 1/24 - 1/25 Scale Interior Junk #1 from Detail Master. It's for average level modelers, not recommended for children under 12. Features: * Complete collection of "junk" parts for model cars, used to clutter up the interior. * Thin etched parts are in a square sprue frame. * Includes keys and key rings, hangers, sunglasses, cassettes, CD's, Slim Jim's, knives, 6-pack holders, wrenches, utensils, a peace. * sign, 3-D Glasses and an evergreen air freshener. * Most items can be cut off the tree and used, sometimes with a little painting.
...more about the Detail Master R/C Interior Junk
|
This is the Detail Master Black Replacement Window Net Hardware Skill Level: Advanced. Features: * These precision photo etched detail parts allow you to duplicate 2 authentic looking window nets. * Metal net support rods and release buckles. * Special self-adhesive black web material. * Nets can be installed open or closed. * Perfectly sized for 1:24 and 1:25 scale models. * Detailed directions.
...more about the Detail Master R/C 1/24 Window Net Hardware Replacement Black (2)
|
This is a 1/24 - 1/25 Scale Stock Car Hood Hinges from Detail Master. It's for extremely skilled and advanced modelers. Features: * .014" diameter Berkeley Trilene nylon fishing line included in package, used to help make the hinge pins in kit. * Black wire included in kit with copper wire inside, used to make a hinge pin mounting tube. * Photo-etched hood pivot brackets, both short drilled style and longer, undrilled style for single prop brackets used on the right. * side of trunk. * Extremely detailed instruction sheet for construction directions.
...more about the Detail Master R/C 1/24 Stock Car Hood Hinges Sup
|
This is a 2 oz. package of White Velour Flocking material from Detail Master. It's for average to skilled modelers. Features: * Loose fiber rayon material. * Used for carpeting, door panels, seats, headliners, and other surfaces. * This material can be blended for custom colors. * Detailed instruction sheet.
...more about the Detail Master R/C Velour Flocking White
|
This is a set of Resin Speakers and Box from Hoppin' Hydro's. For experienced modelers. Features: * For use with Hoppin' Hydro's plastic model cars. * Two subs casted in resin and mounted in a wedge shaped box. * All durable parts are molded in black nylon.
...more about the Hoppin Hydro's Resin Speakers w/Box
|
This is a Sheet of 7" x 10" Krome Foil from Detail Master for experienced modelers. Features: * Adhesive-backed, thin aluminum foil. * Great for chrome trim on model cars, natural metal finishes, and polished metal surfaces. * Also works on window trim, body molding, emblems, scripts, exhaust tips, interior trim, door handles, door locks, metal panels, and. * aircraft bodies. * Adheres to larger compound surfaces like bumpers. * Complete step-by-step instructions included - cut, peel, place, burnish, and trim.
...more about the Detail Master R/C Krome Foil 3.5X10'' (2)
|
This is Black Ignition Wire for 1/24 - 1/25 scale plastic models. It's made by Detail Master for experienced modelers. Features: * Enough wire for several models; excellent wire for most factory stock applications in 1/24 - 1/25 scales. * Accurately represents 7 and 8mm standard ignition wire. * Wire holds its shape after forming (core wire is a single strand of silver plated copper). * May be used for plastic models (aircraft, armor, cars, ships). * Color black works well for small vacuum hose.
...more about the Detail Master R/C Ignition Wire Black
|
This is Dark Blue Ignition Wire for 1/24 - 1/25 scale plastic models. It's made by Detail Master for experienced modelers. Features: * Enough wire for several models; excellent wire for most factory stock applications in 1/24 - 1/25 scales. * Accurately represents 7 and 8mm standard ignition wire. * Wire holds its shape after forming (core wire is a single strand of silver plated copper). * May be used for plastic models (aircraft, armor, cars, ships). * Color works well for small vacuum hose.
...more about the Detail Master R/C Ignition Wire Dark Blue
|
|
