Building Supplies On Sale

This is a 5/8oz Tube of Fast Wood Cement for Wood Models from Testors.

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .

INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

This is a Value Pack 7/8oz Tube of Cement for Plastic Models from Testors. For Ages 8 and Up.

These Gray Styrene Plastic Handrails.

13 Oz. Propellant Can for Spray.

MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. . Learn about how to Select a Super Glue.

This is a Package of ten 1/4" x 1/4" x 24" Basswood strips from Midwest Products Co.

This is a 7/8oz Tube of Cement for Plastic Models from Testors. For Ages 8 and Up.

This is a 1/4oz (7.5ml) glass jar of Enamel Paint from Testors.

This is the Midwest Easy Miter Box with Saw.

This is a 5oz Aerosol Can of Zip Kicker by Pacer.

This is a 3.4oz (100ml) can of Tamiya Color Spray Lacquer for Plastic Models (TS-92 Metallic Orange) For Adult Modelers Only.

This Is A Package of 60 Micro-Cut Basswood Scale Lumber (1/16"x 1/16"x24") by Midwest Products Company.

These are the Flex-I-File Flex-Pad Intro-Set (5) hobby and model sanding tool.

This is the Testors 1oz. Clear Parts Cement w/App (replaces #3515) plastic model and hobby cement.