30-Minute Epoxy 1 oz

This is Devcon's 30 Minute 2 Ton Epoxy & Hardener with the Exclusive Applicator

Devcon 30-Minute Epoxy 1 oz
 Devcon # dev31345
$4.69
DISCONTINUED
 
Retail $6.25  SAVE 25% !
Devcon Item # dev31345
Features :
  • Devcon epoxy adhesives cure and join things together by a chemica reaction between the resin and hardener. This reaction results i high strength bonds that are resistant to most chemicals..
  • Use for household, industrial, crafts, or for any job that require a high-strength, high-quality bond..
  • Best used on these materials -Metal & Woo -Concret -Glass & Chin -Ceramic -Fiberglass.
  • Clear drying color..
  • Working time (time available to mix and apply product and positio repair): 30 minutes..
  • Handling time (the amount of time repair should remain stationary fo product to set): 2 hours..
  • Full bond strength in eight hours..
  • PSI strength: 2,500 pounds per square inch..
  • Waterproof..
  • It is not flammable..
  • Working temperature range (once fully cured it can withstand thi temperature range): -60 degrees to +200 degrees fahrenheit..
  • The exclusive applicator features a patent pending design that make it easy to dispense and mix the right amount of adhesive for an job. The snap off cap eliminates unsafe cutting of the tube end while the snap out paddle in the handle makes it easy to mix Nozzle design lets even the thickest materials flow easily Reseals for storage..
  • Directions on package..
Out of Stock
Discontinued - No longer available for purchase
Website security verified by GoDaddy.

You Might Also Like

← Swipe To View More →

Features

  • Devcon epoxy adhesives cure and join things together by a chemica reaction between the resin and hardener. This reaction results i high strength bonds that are resistant to most chemicals..
  • Use for household, industrial, crafts, or for any job that require a high-strength, high-quality bond..
  • Best used on these materials -Metal & Woo -Concret -Glass & Chin -Ceramic -Fiberglass.
  • Clear drying color..
  • Working time (time available to mix and apply product and positio repair): 30 minutes..
  • Handling time (the amount of time repair should remain stationary fo product to set): 2 hours..
  • Full bond strength in eight hours..
  • PSI strength: 2,500 pounds per square inch..
  • Waterproof..
  • It is not flammable..
  • Working temperature range (once fully cured it can withstand thi temperature range): -60 degrees to +200 degrees fahrenheit..
  • The exclusive applicator features a patent pending design that make it easy to dispense and mix the right amount of adhesive for an job. The snap off cap eliminates unsafe cutting of the tube end while the snap out paddle in the handle makes it easy to mix Nozzle design lets even the thickest materials flow easily Reseals for storage..
  • Directions on package..

Specs

  • Net Volume: 25ml

Includes

One Applicator with 30 Minute 2 Ton Epoxy and Hardener


Requirements & Suggestions

← Swipe To View More →

Reviews


Comments

Not recommended above 200°F (93°C). If temp is below 60°F (15°C) the hardening time is considerably longer..

Others Also Ordererd

← Swipe To View More →