1969 Corvette Coupe Yenko

This is the 1/25 Scale '69 Corvette Coupe Yenko 2in1 Plastic Model Kit by Revell. Suitable for Ages 14 & Older.

Revell-Monogram 1969 Corvette Coupe Yenko Plastic Model Car Kit 1/25 Scale #854411
 Revell-Monogram # rmx854411
$21.59
DISCONTINUED
 
Retail $24.95  SAVE 13% !
Revell-Monogram Item # rmx854411
Features :
  • Highly detailed pieces molded in white, transparent red and clear.
  • Chrome plated parts and soft black tires.
  • Detailed 427 Big Block engine and choice of carburetors.
  • 2 sets of wheels and tampo white walls.
  • Choice of exhaust systems.
  • Waterslide decals.
  • Illustrated instructions.
Out of Stock
Discontinued - No longer available for purchase
Website security verified by GoDaddy.

Spotlight Review

 
"Fantastic Yenko Vette kit!!!!!"
jakeleatherman
This 2 n 1 kit comes with some great images on the box of the Yenko 69 Corvette. Upon opening the box, you are greeted with the body and underside of the car in white styrene, 68 white parts on 4 trees, 45 chrome parts on 3 trees, 2 clear windows, 4 red taillights, and 4 non-descript tires with white lines on one side and black walls on the other. You get 2 hood options, one with a SS427 on the cowl induction, 2 wheel options which are Chevy Rallys, or Torq Thrust wheels. For intake options you get to choose from the 3 deuces, or the Yenko air filter. Decals included white and black hood strips, some of the gauge faces, door handles, body lettering, and some license plates. The model went together well following the standard Revell instruction booklet. The body was primed then painted with MCW Monza red, with MCW clear and then polished out. The interior came together super easy and looks great. The back window didn't quite meet the body but still stayed put. The only problem I encountered was with the radiator, shroud, and fan blades. I really had to trim the fan blades so the radiator and shroud could lean back far enough for the hood to close. The hood really needed some attention sanding the edges prior to painting to make sure the hood closed after painting. I had to trim the inner fender wells after it was assembled were the hood pins/hinges were so the hood would close. I tried to decal the tires but when I sprayed flat clear on them to seal in the tire decals, it didn't go well. The tires did not like the flat clear, so I used some part box tires. PROS of this kit are 1. Hours of fun and enjoyment building this model, 2. Hood, wheel, and exhaust options, 3. Ease of assembly with just few minor exceptions. CONS of this kit are 1. Fan blades, radiator needed some major trimming to fit right, 2. Back window fitment, 3. Needed more gauge decals. Had to use some extras from the stash. I recommend this kit to just about anyone. Just be ready for just a few fit issues and can be tackled if you take your time.

You Might Also Like

← Swipe To View More →

Features

  • Highly detailed pieces molded in white, transparent red and clear.
  • Chrome plated parts and soft black tires.
  • Detailed 427 Big Block engine and choice of carburetors.
  • 2 sets of wheels and tampo white walls.
  • Choice of exhaust systems.
  • Waterslide decals.
  • Illustrated instructions.

Specs

  • Scale: 1/25
  • Length: 7-5/16" (185.73mm)
  • Width: 2-3/4" (69.85mm)
  • Height: 1-15/16" (49.21mm)
  • Skill level: 5
  • Parts: 123

Includes

One plastic model


Requirements & Suggestions

← Swipe To View More →

Reviews

  
 
"I love this Yenko Corvette."
wsweet68
I love Yenko's in general but let me tell you this 69 Corvette with the Yenko package is awesome.

 
"Pretty Easy Kit"
knightstalkr62
This kit went together pretty well most of the way. Minimal flash. It is a little light on the number of parts, but some more inexperienced builders might find this preferable. There was an issue with the hood not staying closed. This could probably have been remedied with some sanding of the hinge pins before assembly, but I took the easy way out and just displayed it with the hood open. I painted this one pink with black interior, and added vanity plates to customize it especially for my wife. It actually turned out to be one of the cleaner kits I have built.

 
"Great kit from Revell"
kshoopman (Chiefs Kingdom)
This is a great building kit with just a few issues that I ran in to. Maybe it would work as in the directions but I changed it up a bit. Step 5 has you glue radiator and fan into place but could see possible clearance issues with the inner fenders when mating the chassis. I waited till chassis and body were mated together and the radiator assembly slid right in to place, just be sure to scrape paint away in radiator mounting locations while at step five. Your upper radiator hose can also be installed after sliding radiator into place for proper alignment. The back glass is a little tricky to get to stay in place also.

Comments

Due to small parts that could cause a choking hazard please kee away from children 3 years of age and younger.

Others Also Ordererd

← Swipe To View More →