Product Rank

Includes

• One 4 oz (118mL) Plastic Bottle of Thinner used for Thinning
• Acrylic Model Master Acryl Paints

Features

• Used specifically for thinning Model Master Acryl Paints.
• Red plastic cap and stopper for storage purposes.
• Small hole in the tip of bottle for drop-by-drop application.

Requirements & Suggestions

• Eye protection.
• Removing red stopper and cap from bottle before use.

Comments

• Keep out of reach of children.
• Contains Propylene Glycol
• In case of eye contact, flush eye immediately and seek medical help.
• Avoid prolonged skin contact.
• For Brushing: Model Master Acryl should not need thinning for brush applications. If thinning is required, add slowly - drop by drop -
• to achieve desired viscosity. Try to thin only the amount of paint
• needed for one session.
• For Airbrushing: Most Model Master Acryl colors will airbrush without thinning. The exception is the Figure Colors which have been
• specifically formulated with a higher viscosity. A thinning ratio
• of 4 parts paint to 1 part thinner is suggested for Figure Colors.
• If more thinner is needed, add slowly - drop by drop. A rule of
• thumb is to "thin to consistency of milk". Fine line detail air-
• brushing requires practice and varies greatly with the
• equipment and air pressure being used. Experiment on a scrap
• before painting finished model.