Epoxy

Shop online for 47 epoxy at discounts up to 26%. Green Stuff Putty is ranked #1 out of 7 epoxy manufacturers, followed by Hobbylinc, and Bob Smith Industries.

Products of Epoxy

Bob-Smith # bsi202
  Add To Cart
Wish List

QUICK CURE 5 Minute Epoxy (9oz)

Hobby Epoxy
$22.99 $17.89
SALE
22% Off
Hobbylinc # hlc202
  Add To Cart
Wish List
QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldn't be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour.

QUICK CURE 5 Minute Epoxy (4 1/2oz)

Hobby Epoxy
$13.99 $10.89
SALE
22% Off
Hobbylinc # hlc201
  Add To Cart
Wish List
QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldn't be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour.

MID CURE 15 Minute Epoxy (9oz)

Hobby Epoxy
$22.99 $17.89
SALE
22% Off
Hobbylinc # hlc204
  Add To Cart
Wish List
MID-CURE 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE in most applications. MID-CURE is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.
Website security verified by GoDaddy

SLOW CURE 30 Minute Epoxy (9oz)

Hobby Epoxy
$22.99 $17.89
* currently unavailable
SALE
22% Off
Hobbylinc # hlc206
  Pre-Order
Wish List
SLOW-CURE 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE can be used for bonding if you're willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE and FINISH-CURE to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.

30-Minute Epoxy 9 oz

$21.99 $16.79
SALE
24% Off
Devcon # dev33345
  Add To Cart
Wish List
This Heavy-Duty Epoxy Sets in Approximately 30 Minutes, Allowing You Time to Position and Clamp. It's Very Useful in Places Where Strength Really Counts,.

Dev-Tube 5 Min. Epoxy 1 oz

$6.79 $5.59
* currently unavailable
Devcon # dev20845
  Pre-Order
Wish List
This is Devcon's 5 Minute Epoxy & Hardener with the Exclusive Applicator.
SALE
26% Off
Bob-Smith # bsi206
  Add To Cart
Wish List

MID CURE 15 Minute Epoxy (4 1/2oz)

Hobby Epoxy
$13.99 $10.89
SALE
22% Off
Hobbylinc # hlc203
  Add To Cart
Wish List
MID-CURE 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE in most applications. MID-CURE is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.

Z-Poxy 30-Minute 8 oz

Hobby and Craft Epoxy
$19.98 $15.99
* Due Early Mar. *
Pacer # paapt39
  Pre-Order
Wish List
15 min. work time, cures in 30. Great for fiberglass fuselages, boat hulls, skinning foam parts. Equal-mix, accepts balloon filler for forming fillets.

FINISH CURE 20 Minute Epoxy (13oz)

Hobby Epoxy
$44.99 $34.89
SALE
22% Off
Hobbylinc # hlc210
  Add To Cart
Wish List
FINISH-CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light we

SLOW-CURE 30M EPOXY 13OZ

$29.99 $25.19
* currently unavailable
Bob-Smith # bsi213
  Pre-Order
Wish List
SALE
26% Off
Bob-Smith # bsi203
  Add To Cart
Wish List

Aeropoxy Laminating Resin (300g)

Hobby and Plastic Model Epoxy
$29.95 $23.79
* currently unavailable
Deluxe-Materials # dlubd1
  Pre-Order
Wish List
This is the Deluxe-Materials Aeropoxy Laminating Resin (300g) hobby and plastic model epoxy.

Z-Poxy 5-Minute 8 oz

Hobby and Craft Epoxy
$19.98 $15.99
* Due Early Mar. *
Pacer # paapt38
  Pre-Order
Wish List
Clear, equal-mix. Cures in 5 minutes. Fuel-proof, vibration resistant formula. Flexible and durable, sandable. Excellent for furniture.