Community > Members > GTClassicPlastic > Shared Images > MPC # MPCPC859
I mark this as "modified" only because I added the dump box from an Autocar kit. Everything else is box-stock. This is an original issue kit over 40 years old.
Like 31 Likes
Built box-stock but I added the dump box, this is an original issue kit, 40+ years old from the Gary Tanck collection.
Like 26 Likes
This is my newest Mack DM600 I brought from Hobbylinc. Still being built. I am hooking this one to the 3-axle gravel trailer also available thru this wonderful on-line store!
Like 31 Likes
This is a start of a "highly modified" version of the kit. This is the second kit I bought thru Hobblylinc.com I am attempting to create a 'long nose' and I am adding a cement mixer drum from an old DM800 kit.
Like 33 Likes
Here I am building both Macks side by side; but I am switching the chassis of the two. The models are both presently available from Hobbylinc.
Like 21 Likes
This picture shows the DM600 on the left; This should help show you the difference between it and the centered cab of the R-serious of the AMT kit (on right).
Like 21 Likes
I'm building this one Yellow & Green, and I will be adding the dump box (option) from the 3-axle gravel trailer kit. The trailer is presently available through Hobbylinc.
Like 19 Likes
Like 19 Likes
I'm making this one into a Cement Mixer. I used two DM600 frames and extra axles and a "Rex" mixer kit from an old Ertl/MPC.
Like 19 Likes
I'm making this one into a Cement Mixer. I used two DM600 frames and extra axles and a "Rex" mixer kit from an old Ertl/MPC.
Like 19 Likes
I'm making this one into a Cement Mixer. I used two DM600 frames and extra axles and a "Rex" mixer kit from an old Ertl/MPC.
Like 19 Likes
This shows a little bit how I created the "long nose" and open side hood. By Gary Tanck
Like 19 Likes
This is another customized version of the DM600 kit. I centered the cab and made custom fenders & grill and also the headache rack.
Like 19 Likes
Another customized version of the DM600 kit, By Gary Tanck
Like 18 Likes
Like 18 Likes
This is another customized version of the DM600 kit. I centered the cab and made custom fenders & grill and also the headache rack.
Like 18 Likes
Here i am showing how it would look with the gravel trailer kit that Hobbylinc currently has available. The trailer kit has a customization option & comes with the cab-cover/front end. By GT Classic Plastic
Like 18 Likes
Here i am showing how it would look with the gravel trailer kit that Hobbylinc currently has available. The trailer kit has a customization option & comes with the cab-cover/front end. By GT Classic Plastic
Like 18 Likes
Being built with the frame from an AMT Mack kit (cause it's longer) and adding the "dump box" option from the mpc gravel trailer. Also used chrome rims. By: GT
Like 18 Likes
This one was built with an R-series frame/chassis (because its slightly longer) and wheels from a Kenworth and with a dump body (cut down from a dump trailer). Go Pack Go!
Like 19 Likes
This one was built with an R-series frame/chassis (because its slightly longer) and wheels from a Kenworth and with a dump body (cut down from a dump trailer).
Like 19 Likes