This is the Tuff Bird Free Flight Jet Glider from Revell. New $1.09 (31% off). Suitable for Ages 8 & Up. Features: * Balsa construction with printed-on details. * Easy to fly. * Assembles in minutes, no tools needed.

PECA1005.C-L PECK-POLYMERS FREE FLIGHT AIRPLANES Peck-Polymers offers high-quality contest and sport rubber band-powered aircraft. New $3.19 (36% off). Among their ""Peanut Scale contest model kits are the 13 span Piper J3 Cub, 13 span P-51 Mustang, 13 span Zero, and 13'' span Lacey M-10. Several sport aircraft are also available, such as the Peck R.O.G., an excellent first rubber-powered model that's easy to build and will launch off the ground.

New $0.99 (33% off).

New $1.19 (33% off).

This is a strip of rubber 1/8" wide and 16 feet long. New $2.69 (30% off). This is the type of rubber strip used in most rubber powered models.

This is a Super Bear Rubber Band Powered Model Plane Kit from the SkyRyders Series by AG Industries. New $7.09 (29% off). Suitable for Ages 6 and Older. Features: * Flies over 100 yards! * Pre-covered wooden silhouette fuselage with pre-printed foam core wings and tail. * Blue and white trim scheme. * Includes black plastic propeller, wire landing gear with black plastic wheels and a supply of rubber bands. * Resembles a Piper Cub. * Fun to fly and easy to assemble. * No tools or glue required. * Hand launch. * Pictorial assembly and launch instructions.

Assemble a Curtiss P-40 Warhawk "Flying Tiger" World War II Airplane with this authentic 3/4" Scale flying balsa model kit from Guillow's. New $39.08 (20% off). Scale model for adult collectors. Features: * Authentic scale airplane. * Designed to be built as a magnificent static desplay model, a flying rubber powered, gas free flight or a U-Control model! * Complete decal set including decals for "Tiger Shark" insignia. * Light plastic nose cowl and detailed parts. * Rubber motor. * Plastic wheels. * Reinforced wire landing gear. * Plastic propeller and molded canopy. * Razor sharp die-cut balsa parts. * Covering tissue. * Clay is included for balancing the model. * A generous amount of strip st

This is the 5/1 Rubber Band Winder by Peck-Polymers for Rubber Powered Models. New $7.39 (31% off). Features: Speeds winding of your rubber band powered plane.

This is the F4U Corsair Rubber-Powered Free-Flight Airplane from Dumas. New $19.69 (26% off). This is a walnut scale airplane. Features: * Simple, built-up Balsa construction. * Hand-selected balsa. * 70 Laser-cut parts. * FAI Tan II contest rubber. * Vacuum molded parts. * Color peel and stick decal set. * Lightweight blue colored tissue. * Clear canopy.

The Cessna Skylane II is a Rubber Band Powered Flying Model Plane. New $7.09 (29% off). A Lyonaeec Designed Kit Suitable for Ages 6 and Older. Features: * Easy to assemble! * Excellent flying performance. * Special nose to prevent the turn-axle bend. * Propeller is powered by a rubber band. * Balsa fuselage. * Foam wings, horizontal and vertical tails. * Landing gear consist of plastic wheels assembled to a 3mm wire. * Hand launch. * No tools or glue required. * Colored, self-adhesive decals. * Assembly and launch instructions are illustrated in detail.

This is a strip of rubber 3/16" wide and 16 feet long. New $2.79 (31% off). This is the type of rubber strip used in most rubber powered models.

This is a Walnut scale, Rubber-Powered, Piper Cub Coupe Free Flight Model. New $16.79 (26% off). For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 60 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Red and White Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Cowling and Clear Plastic Windshield Sheet. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller

New $1.69 (34% off).

This is a Sky Lark Rubber Band Powered Model Plane Kit from the SkyRyders Series by AG Industries. New $6.79 (32% off). Suitable for Ages 6 and Older. Features: Flies over 100 yards (91m)! Pre-covered wooden silhouette fuselage with pre-printed foam core wings and tail Blue and white trim scheme Includes white plastic propeller, wire landing gear with white plastic wheels and a supply of rubber bands Easily converts from a single wing model to a bi-plane Fun to fly and easy to assemble No tools or glue required Hand launch Pictorial assembly and launch instructions.

New $2.69 (32% off).

This is a Dumas Rubber-Powered, Fokker Eindecker E III Flying Scale Model. New $16.29 (31% off). Features: * "Stick and Tissue" construction (many small sticks glued together to form the airplane and then the frame is covered with tissue paper). * Over 60 laser-cut parts and hand selected balsa. * Lightweight white tissue paper covering. * Color peel-and-stick decal set. * Full size plan and step-by-step instructions. * Plastic propeller, tailwheel and 2-two-piece wheels. * Vacuum-formed plastic cowling, wheel pants and clear plastic windshield sheet. * F.A.I. tan II contest rubber bands. * Un-bent landing gear wire and pre-hooked propeller shaft.

The Guillow's Jetstream is All Balsa Wood Airplane Glider with Landing Gear and Powered by A Rubber Band. New $51.56 (20% off). Suitable for Ages 8 and Older. Features: * Made of genuine balsa wood (die-cut sheets). * Easy-to-fly and assemble (constructed with slots). * Hand launch or ground level take-offs. * Flies over 150 feet. * Plastic propeller and landing wheels. Wheels are attached to thick wire 'legs.'. * Pre-printed green stripes, "Jetstream" and 55. * Ideal contest flyer. * Instructions for flight and assembly printed on package.

This is a Walnut scale, Rubber-Powered, Curtiss P-6E Free Flight Model. New $18.99 (26% off). For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 70 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Yellow and Green Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Plastic Cowling and Engine Exhaust Sheet. * Flat Plastic Window Sheet. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wir

This is a rubber band powered airplane kit. New $5.79 (31% off). It includes plastic prop and bearing, contest balsa, tissue paper covering, wheels, rubber motor(rubber band), and 3 view plans. WAJ 8/16/92.

This is a Walnut scale, Rubber-Powered, Tiger Moth Free Flight Model. New $17.49 (26% off). For Beginners Learning How To Build & Fly Or The Advanced Modeler. Features: * "Stick and Tissue" Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). * Over 90 Lazer-Cut Parts and Hand Selected Balsa. * Light-Weight Yellow Tissue Paper Covering. * Color Peel-And-Stick Decal Set. * Full Size Plan and Step-By-Step Instructions. * Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. * Vacuum-Formed Cowling. * F.A.I. Tan II Contest Rubber Bands. * Un-Bent Landing Gear Wire and Pre-Hooked Propeller Shaft. * This is a bi-wing airplane.