LiPo Onyx 3S 11.1V 8000mAh 35C Soft Case Deans
This is the DuraTrax Onyx 11.1V 8000mAh 35C Shrink Wrapped LiPo Battery with the Dean's Ultra Connector.
Dura Trax # dtxdtxc1995
$101.39
Retail $179.99 SAVE 44% ! | |
Out of Stock Discontinued - No longer available for purchase |
Website security verified by GoDaddy.
Features
- Ideal for 1/10 scale car applications.
- Prewired with Dean's Ultra Connector.
Specs
- Voltage Rating: 11.1V
- Rated Capacity: 8000mAh
- Discharge Rating: 35C continuous
- Dimensions: 5.1 x 1.8 x 1.7" (130 x 46 x 43mm)
- Weight: 20.4oz (580g)
- Discharge Lead/Connectors: 12AWG Wires, Dean's Ultra
- Balancing Connector: ElectriFly
- Watt Hours: 89Wh
Includes
11.1V 8000mAh 35C Shrink Wrapped LiPo Battery with Dean's Ultra Connector
Requirements & Suggestions
- Balancer and LiPo compatible charger or LiPo charger with built-in balancer such as the Onyx 235, DTXP4235
Reviews |
Comments
- ALWAYS use a LiPo-approved Charger.
- ALWAYS use a LiPo Cell Balancer.
- NEVER Charge over 4.2V per cell.
- NEVER Charge at currents greater than 1C.
- NEVER Charge through the "To ESC or "DISCHARGE" lead.
- NEVER Trickle Charge.
- NEVER allow to Discharge below 2.5V per cell.
- NEVER disassemble or modify pack wiring in any way or puncture cells.
- NEVER place on combustible materials or leave unattended durin charging.
- ALWAYS Charge in a fireproof location.
- ALWAYS set charger's output volts to match battery volts.
- ALWAYS keep out of reach of children.
- All weights include wire leads and plugs.
- All weights +/- 1 g.