This is a Two-Blade Aluminum Spinner w/Aluminum Backplate from Great Planes.:
Product Features
- Machined For Accuracy, Then Polished To A Gleaming Finish..:
- Easy To Install, Having A Bolt-On Design, Centers Each Spinne Perfectly On Its Baseplate..:
- Spinner Cone Is Recessed To Mate Into the Spinner Backplate. The Rea Of The Spinner Is Flat, Without An Overhanging Cone..:
- Includes Black 10-32 Bolt That Holds Spinner Cone to Backplate..:
- Adapter Kits For Different Engine Sizes Are Available Separately (See COMMENTS).:
Product Specifications
- Spinner Backplate Diameter: 2-1/4 (57mm):
- Spinner Backplate Mounting Ring Thickness: 3/16 (4mm):
- Spinner Backplate Hole Diameter: 3/8 (9.5mm):
- (The Adapter Kit Will Contain An Aluminum Bushing To Fit The Crankshaft Size.)
- Length From Back Of Backplate To Front Of Cone: 2-1/4 (57mm):
- Height Of Propeller Slot: 3/4 (19mm):
- Length Of Propeller Slot: 13/16 (21mm):
What's Included
- One Aluminum Spinner Cone:
- One Aluminum Backplate (See Specs For Sizes):
- One 10-32 x 1 Mounting Bolt:
- One Box with Installation Instructions and Safety Tips:
Required
- One Spinner Adapter Kit (See COMMENTS):
|
Click a link to the left to view products here... |
Product Rankings Manufacturer Comments - Warning: Failure To Follow The Instructions Printed On The Box Ma Cause The Propeller To Separate From The Model..:
- If The Spinner Cone Touches The Propeller At Any Point, Use A Fil Or MotoTool To Relieve This Area..:
- Spinner Adapter Kit To Use Will Be Determined By Engine Crankshaf Size. Use One Of The Following GPMQ4581 - OS Max 20-40 FP, 25-46 FX & SF.:
- (1/4 GPMQ4584 - OS Max 60 FP, 61 FX & SF, SuperTigre 61 (5/16 GPMQ4585 - OS Max FS 26-52 Surpas (1/4 GPMQ4588 - OS Max FS 70-120 Surpass, 140 RX (5/16 GPMQ4589 - OS Max 1.08 FS (3/8 GPMQ4590 - SuperTigre S 2500-450 (10mm
|
Also Viewed
E-Spinner 2-1/4 Trans Blue w/Alum Backplate
$8.49 [ 29% off ]
Spinner 2-1/2 Aluminum
$23.99 [ 14% off ]
E-Spinner 2-1/4 Trans Black w/Alum Backplate
$8.49 [ 29% off ]
|
|
|
|
;postJson('/cgi-bin/a4.cgi','aform');)
