TT-0822A Double Adapter Kit Saito 120 & Up
This is an Adapter Kit Used To Mount Tru Turn Aluminum Spinners Onto The: Saito 1.20 (old) single, 150 (old) single, 170 Radial, 1.80 (old) single and 3.25 four stroke engines. (For Pre-1999 Saitos See COMMENTS):
True Line Trains # tru0822a
$11.69
Retail $14.95 SAVE 22% ! | |
Out of Stock Discontinued - No longer available for purchase |
Website security verified by GoDaddy.
You Might Also Like
← Swipe To View More →
Features
Steel Adapter Nuts Screws Onto The Crankshaft Holding the Propelle On, Then A 10-32 Bolt Screws Into The Nut From Front, Holding Th Spinner In Place..:
Specs
- Crankshaft Thread Size: 8 x 1.25mm:
- Spinner Mounting Bolt Thread Size: 10-32:
Includes
One Short Shaft Double Jam Nut Adapter Kit:
Requirements & Suggestions
- 1/2 End Wrench To Tighten:
- Tru Turn Aluminum Spinner:
Reviews |
Comments
- While This Adapter Does Not Use A Bushing, It Is REQUIRED That Som Modifications Be Made To The Spinner Backplate. The Backplat Must Be Reamed Out To 10mm (.394) For 1.20 or Larger (Except 1.30 Engines. This Must Done Accurately.:
- Use The Saito Aluminum Washer Under Your Tru Turn Adapter Nu and Washer, Then Check Closely For Threads Bottoming Out O Interfering..:
- Tru Turn Will Modify Backplate For A Small Fee and Postage Paid..:
- The 10-32 Bolt That Is Included With The Spinner Might Requir Cutting, Depending On The Prop Used..:
- Older Saito Engines (Pre-99) Will Use The TT-0828-A. Thi MAY BE REPLACED BY The TT-0822-A and CAN NOT Be Used In ANY NE Applications