PRO .12BK w/Rotary Carb
This is the Thunder Tiger Pro .12BK 2-Stroke Model Car Engine.:
Thundertigre Usa # ttr9459
$90.39
Retail $149.99 SAVE 40% ! | |
Out of Stock Discontinued - No longer available for purchase |
Website security verified by GoDaddy.
You Might Also Like
← Swipe To View More →
Features
- Side exhaust.:
- Built-in hexagonal shaft starting system (shaft not included).:
- CNC machined components.:
- ABC piston and sleeve Aluminum piston, Brass cylinder liner tha is Chrome plated.:
- Hyperutectic machined Al-Si ringed piston.:
- Dual ball bearing-supported SG crankshaft.:
- Two needle valve rotary carburetor.:
- Three year limited warranty through Hobby Services beginning at dat of purchase.:
Specs
- Displacement: .129 cu in (2.11cc):
- Bore: 0.545 (13.85mm):
- Stroke: 0.551 (14.0mm):
- Practical RPM: 3,000 - 30,000:
- Output: 0.60 HP @ 29,000 rpm:
- Weight: 8.28oz (234g):
- Carburetor Settings-NOTE carburetor is preset from the factory and requires only small adjustments
- Needle Valve: 2-1/2 - 3 turns counterclockwise from closed:
- Air Bleed Screw: After setting needle valve, 1/8 turn clockwise if mixture is too rich or 1/8 turn counter-clockwise if mixture is too lean
Includes
Thunder Tiger Pro .12BK Model Car Engine with carburetor, air filter with foam element, decals and instruction manual
Requirements & Suggestions
- Fuel: 20% lubricant and 10-30% nitro content, synthetic/castor blend lubricant recommended (do not use more than 10% nitro content for break in)
- Glow Plug: Long type recommended such as the OS #8:
- Glow starter, plug wrench and field equipment:
← Swipe To View More →
Reviews |
Comments
Height from Mounting Tab Bottom/Top of Cylinder Head: 2.7 (68.3mm) Height from Crankcase Bottom to Top of Cylinder Head: 3.1 (80mm) Width at Mounting Tabs: 1.6 (39.5mm) Width of Crankcase below Mounting Tabs: 1 (25.4mm) Center of Mounting Holes Same Side: 0.43 (11mm) Center of Mounting Holes Opposite Side: 1.2 (32mm) Center of Crankcase to Front Bearing: 1.3 (34.5mm) Distance from Shaft Starter to Front Bearing: 2.6 (66mm):