DCC Sound & Control Decoder - For Kato SD40-2

This is the N Scale DCC Sound & Control Decoder - For Kato SD40-2 by MRC.

MRC DCC Sound & Control Decoder - For Kato SD40-2 Model Railroad Electrical Accessory #1806
 MRC # mrc1806
$82.95
DISCONTINUED
 
Retail $99.98  SAVE 17% !
MRC Item # mrc1806
Features :
  • SD40 synchronized diesel prime mover sounds
  • 1.0 amp capacity
  • 16 different types of horns and 8 types of bells
  • Programmable individual sound volumes
  • Programmable either 2-digit or 4-digit addresses
  • Programmable start voltage and top voltage
  • Programmable acceleration and decelaration rates
  • Programmable 14, 28, 128 speed steps
  • Supports full read back
  • Selectable factory default speed curve
  • Advanced speed table control CV67-CV94
  • Kick start voltage control CV65
  • 3 headlight effects: Directional / rule 17 /off-dim-bright cycle.
  • 28 accessory functions (F1-F28)
  • Supports advanced consisting (CV19)
  • Supports programming on the main (OPS move)
  • Compatible with NMRA DCC standards
  • Complies with Part 15 of FCC Rules
  • 10mm, 32 ohm speaker included
  • PCB size: 72mm x 9.7mm x 6.3mm
  • Directly replaces Kato SD40-2 PC Boards
Out of Stock
Discontinued - No longer available for purchase
Website security verified by GoDaddy.

Spotlight Review

 
"Not impressed at all by this decoder"
derfliegrende
For $75, the motor contact strips should already be soldered onto the board...this decoder is far from drop-in.

You Might Also Like

← Swipe To View More →

Features

  • SD40 synchronized diesel prime mover sounds
  • 1.0 amp capacity
  • 16 different types of horns and 8 types of bells
  • Programmable individual sound volumes
  • Programmable either 2-digit or 4-digit addresses
  • Programmable start voltage and top voltage
  • Programmable acceleration and decelaration rates
  • Programmable 14, 28, 128 speed steps
  • Supports full read back
  • Selectable factory default speed curve
  • Advanced speed table control CV67-CV94
  • Kick start voltage control CV65
  • 3 headlight effects: Directional / rule 17 /off-dim-bright cycle.
  • 28 accessory functions (F1-F28)
  • Supports advanced consisting (CV19)
  • Supports programming on the main (OPS move)
  • Compatible with NMRA DCC standards
  • Complies with Part 15 of FCC Rules
  • 10mm, 32 ohm speaker included
  • PCB size: 72mm x 9.7mm x 6.3mm
  • Directly replaces Kato SD40-2 PC Boards

Specs

  • MRC Product Number: 1806
  • Walthers Product Number: 500-1806
  • Walthers Catalog: 2015 HO, page 839

Requirements & Suggestions

← Swipe To View More →

Reviews