G-R-S Model Trains

All scenes include a Micro-Flamemaker kit, plus instructions for wiring, installation and painting. 6-20V AC/DC. A pair of hobos camp for the night, cooking stew over a small fire. Complete kit with detailed base casting and two painted soft metal
...more about the G-R-S Micro Liting Miniature Scene -- Hobo Camp w/Working Fire - HO-Scale

A content prospector warms himself by the fire, while his trusty mule grazes nearby. Kit comes with detailed scene casting, prospector, mule and several soft-metal
...more about the G-R-S Micro Liting Miniature Scene -- Prospector's Camp w/Working Fire - HO-Scale

Gold plated and
...more about the G-R-S Micro Liting 2-Pin Micro-Connector -- With 5'' Color-Coded Leads

Perhaps the smallest electrical motor to be found in the model railroad industry. Not a toy motor; built to military standards. Use for static model aircraft, boats, working saw mills and conveyors. Draws 35mA at 1.5V DC, 120mA at 3.0V DC. Speed; 1 2,000 rpm, no
...more about the G-R-S Micro Liting 1.5 Volt Ultimate Micro Motor

Kit provides a realistic ''rotating beam'' effect with moving parts or mechanical assemblies. Bulb rapidly ramps up to full brightness, then slowly dims to give the illusion of a rotating beacon. This gives a more realistic look to any lighthouse, rather than using a permanent ''on'' or flasher-type bulb. For use with O
...more about the G-R-S Micro Liting Lighthouse Beacon - O-Scale

Typical outdoor/security lamp, interior lighting for warehouse, roundhouse and engine repair shops, and is suitable for all types of buildings. Includes clear micro bulb, painted metal shade and instructions. HO and N
...more about the G-R-S Micro Liting Green Shade Lamp/1.5 volt

Can be used to light building interiors or passenger car interiors. 12-16V
...more about the G-R-S Micro Liting Heavy-Duty Fluorette Lamps -- Lamp Holder

These tiny light bulbs are perfect for use with signals, headlights or wherever space is limited. Bulbs are designed for use with 1.5V DC (15mA) and measure 1.4mm. Long life
...more about the G-R-S Micro Liting Super Microbulb 1.5V, 15mA, 1.4mm Diameter -- Clear

Unit simulates the flickering light produced by a small bonfire or campfire. 6-20V AC/DC. Used with all
...more about the G-R-S Micro Liting Micro Flamemaker

For model signs, billboards, beacons, etc. Includes two clear heavy-duty microbulbs.
...more about the G-R-S Micro Liting Microflasher Slow

Basically the same as #296-1001, but with flash rate of one second on and off to simulate vehicle turn signals, traffic lights or road
...more about the G-R-S Micro Liting Micro Flasher, Fast -- 1 Red Bulb & 1 Amber Bulb

Pure white strobe effect achieved through two strobe blue microlamps, included. For use on model signs, trains, planes, boats, etc.
...more about the G-R-S Micro Liting Micro Strobe

Unit simulates large fires such as a working blast furnace or a burning structure. Can be used in any scale. 16-20V AC. Circuit board is 1 x 1 x 5/8'' high. Lamp assembly 3/16'' diameter, 7/8''
...more about the G-R-S Micro Liting Super Flamemaker

Kits come complete with assembled electronics, heavy-duty microbulbs, hardware and instructions. 6-20V AC or
...more about the G-R-S Micro Liting Vehicle Lighting Kit -- Rotating Beacon (red) - HO-Scale

Kit provides a realistic ''rotating beam'' effect with moving parts or mechanical assemblies. Bulb rapidly ramps up to full brightness, then slowly dims to give the illusion of a rotating beacon. This gives a more realistic look to any lighthouse, rather than using a permanent ''on'' or flasher-type bulb. For use with G or 1/12
...more about the G-R-S Micro Liting Lighthouse Beacon - G-Scale

Kits come complete with assembled electronics, heavy-duty microbulbs, hardware and instructions. 6-20V AC or
...more about the G-R-S Micro Liting Vehicle Lighting Kit -- Dual Litebar with 2 Red and 2 Blue Lenses

Kits come complete with assembled electronics, heavy-duty microbulbs, hardware and instructions. 6-20V AC or
...more about the G-R-S Micro Liting Vehicle Lighting Kit -- Dual Lightbar (blue/blue)

Kits come complete with assembled electronics, heavy-duty microbulbs, hardware and instructions. 6-20V AC or
...more about the G-R-S Micro Liting Vehicle Lighting Kit -- Rotating Beacon (amber)

Kits come complete with assembled electronics, heavy-duty microbulbs, hardware and instructions. 6-20V AC or
...more about the G-R-S Micro Liting Vehicle Lighting Kit -- Basic Vehicle Lighting Kit

Adjustable action and brightness to model the color and sporadic action of an actual arc welder. Great in railroad shops like Allied Rail Rebuilders. Includes full assembled driver, blue- and rose-colored lamps (can be viewed directly or indirectly ) and mounting Velcro for driver. 12-20V AC/DC
...more about the G-R-S Micro Liting Ultimate Arc Welder

These tiny light bulbs are perfect for use with signals, headlights or wherever space is limited. Bulbs are designed for use with 1.5V DC (15mA) and measure 1.4mm. Long life
...more about the G-R-S Micro Liting Super Microbulb 1.5V, 15mA, 1.4mm Diameter -- Green

Powers up to 53 1.5V, 15mA (800mA) micro bulbs on a layout diorama or module using any 4-20v ac power source. Unlike AC transformers, the Litepac provides a fully regulated and filtered DC voltage that can extend bulb life up to 50%. A ''Bulb Saver '' circuit helps prevent harmful AC overvoltage conditions from destroying delicate 1.5V micro bulbs. Litepac comes fully assembled with built-in overload protection, instruction and mounting hardware. Powers up 50 or more micro
...more about the G-R-S Micro Liting Litepac -- 1.5V Converter/Regulator

includes 1/16'' diameter post adjustable to 12 HO Scale feet, 6mm frosted globe, #100 microbulbs and instructions. Use for N through S
...more about the G-R-S Micro Liting Street Light Kit -- Frosted Globe