Building Supplies

This is the 85ml Bottle Liquid Mask from Vallejo Acrylic Paints.

23ml Jar of Tamiya XF-1 Black color Acrylic Flat (Matt) Paint.

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .

Ready to use matte-medium that is a multi use product for Ballast, Turf, etc.

This is the 1.35fl oz (40ml) Bottle of Tamiya Panel Line Accent Paint in Clear Black.

Extra-thin plastic model cement with applicator brush. Used to glue parts already held together. The thin glue will wick into the joint for a firm bond.

This is the Fairy Flesh Tones Fantasy-Pro Paint Set from Vallejo Acrylic Paints.

This is a Grip-On Knife (Assorted Colors) from Excel.

180ml Spray Can of Tamiya's Surface Primer L (White) for Plastic and Metal.

180ml Spray Can of Tamiya's Surface Primer L (Gray) for Plastic and Metal.

This is a 250ml Bottle of Tamiya color Acrylic Paint (Thinner).

This is a 1/4oz (7.5ml) glass jar of Enamel Paint from Testors.

This is a 5/8oz Tube of Cement for Plastic Models from Testors. For Ages 8 and Up.

23ml Jar of Tamiya XF-2 White color Acrylic Flat (Matt) Paint.

180ml Spray Can of Tamiya's Fine Surface Primer L (Gray) for Plastic and Metal.

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .

QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldn't be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour.

This is a 1/4oz (7.4ml) Glass Jar of Semi-Gloss Black Enamel Paint from Testors.

The White sheets are used to construct buildings for your railroad diorama's and layouts. They may also be used for various scratch craft projects and miscellaneous projects.

100ml Can of Tamiya TS-13 Clear Synthetic Lacquer Paint.