A10-3T Model Rocket Engines (4)

This is an A-class A10-3T mini model rocket engine from Estes. For use in single stage model rockets.

Estes A10-3T Model Rocket Engines (4) Mini Rocket Motor #1511
 (40)
 Estes Rockets # est1511
$8.99 on sale $8.39
 
Retail $11.29  SAVE 26% !
Estes Rockets Item # est1511
Features :
  IN STOCK
USA Ground Shipping Only
Website security verified by GoDaddy.

Spotlight Review

 
"big punch in such a tiny package"
SteveAwesome (Highlands Ranch, Colorado)
all my micro rockets get these loads - they jump off the launch pad so fast its amazing. don't blink - these little guys are fun and quick - highly recommended for any rocket requiring this size engine.

You Might Also Like

← Swipe To View More →

Features


Specs

  • Length: 1 3/4"
  • Diameter: 1/2"
  • Estes Product Number: 1511

Includes

  • 4 A10-3T Model Rocket Engines
  • 4 Igniters
  • 4 Plugs

Requirements & Suggestions

← Swipe To View More →


Reviews

  
 
"Strong for a mini motor"
andrew359
These really get your smaller rockets off the pad FAST. We shot a sky duster up like a lighting bolt. it was very cool. The are strong enough for use in a 18mm airframe with an adapter, particularly if the model is small and or your field is

 
"Small, cheap and powerful (for the size)"
J-R-S
Mounted in a 1.3 ounce, 10-inch long BT-5 rocket like the FIRESTEAK this motor shot it up clean out of sight. Just for the heck of it, I even tried one with an adapter in the 3.2 ounce, 35-inch long, BT-55 AMAZON rocket... thinking it would barely get it off the pad -- and damned if it didn't lift that beast 12 feet into the air. Great for small and even medium sized birds, but with one caveat: The ejection charge is a little weak for body tubes wider that a BT-20, particularly if more than 15 to 20 inches long. In the case of my test with the AMAZON it did not have enough ejection power after traveling up the 30 inches up to the nose cone to pop the chute.

 
"Strong Motor. Likes to CATO."
breightbiz
I have used these motors extensively when launching in smaller fields. These motors can lift a 3 oz rocket with authority, but they keep the apogee lower so you recover your rocket in small areas! I fly BT-50 size rockets which are great because you can actually fit wadding, streamers and 'chutes inside the airframe, unlike the BT-20 size and ESPECIALLY the BT-5 size tubes. Use a motor adapter to fit these mini motors into a BT-20 or BT-50 airframe tube. WARNING: Because of the high output of these motors, I have about a 1 in 10 fail rate, i.e. the motor over-pressurizes (CATOs) when rocket is several feet off the pad. (Remember the old B-14 motors? Same problem here). Build your rocket strong if you will be using these motors. For rockets 2 oz. in weight or less, I recommend the A3-4T which does not suffer from the CATO problems of the A10-3T.

Comments

  • WARNING: Model rocket motors are flammable. Please use caution.
  • Must be 14 to purchase in CA and NJ.
  • Do not burn engines.
  • Soak in water to destroy.

Others Also Ordererd

← Swipe To View More →