Spray Flat Light Aircraft Gray 3 oz

This is a 3 oz. (85 g) can of Flat Light Aircraft Gray Enamel Spray Paint.

Testors Spray Flat Light Aircraft Gray 3 oz Hobby and Model Enamel Paint #1233
 Testors # tes1233
Retail $8.99  SAVE 21% !
Testors Item # tes1233
Specifications :
  • Testors Product Number: 1233
USA Ground Shipping Only
Website security verified by GoDaddy.

Spotlight Review

"Good for fighter jets"
This is a nice flat aircraft gray for fighters. A bit expensive, but good stuff.

Member Gallery

(Pictures shared by our community)

You Might Also Like

← Swipe To View More →


  • Made of enamel and is flammable and toxic.
  • Can be used for
  • models, ceramic, plastics, leather, stone, metal, styrofoam,
  • crafts, wax, glass, paper, figures, fabric, wood and touching
  • up purposes.
  • Not suitable for polyethylene or vinyl.
  • Contains no lead or harmful CFC'S.
  • Easy-to-hold can.
  • Does not exceed 80% VOC by weight.


  • Testors Product Number: 1233


One 3 oz. (85 g) Can of Flat Light Aircraft Gray Enamel Spray Paint.

Requirements & Suggestions

Eye, Lung and Skin protection.

← Swipe To View More →


"flat light gray spray paint"

"Goes on a little rough"
Shane S. (Dallas, Tx)
this is a real nice color to use instead of a flat white where you don't want a REALLY bright white. Although the paint goes on a little rough. I recommend hitting it with a dull clear afterward to help smooth it down a bit. Unless you put sufficient coats to allow for sanding. I used this in place of gloss white on the underside of my 1/74 Academy Dassault Super Etendard (Argintine Navy) and it looks great.

"More beige looking"
My can was more of a light beige color instead of gray. Did not work at all for modern day USAF gray compatibility.


  • Keep out of reach of children.
  • Highly Flammable Paint, avoid heat, flame or puncturing can.
  • Avoid eye contact, skin contact or prolonged breathing of vapors, best to use in a well-ventilated area.
  • Inhaling contents is harmful to respiratory tract and nervous system.
  • Product has chemical known to cause birth defects and other reproductive harm in the state of California.
  • Shake can vigorously before using, reshake often and use at room temperature.
  • For best desired results, test product first.
  • Spray with even strokes and do not stop painting in the middle, for the best results.
  • To avoid wrinkling, recoat within 3 hours or after 48 hours.
  • To clear valve after use, invert can and spray several seconds, if nozzle clogs, clean with thinner.