Servo Digital Rudder
This is the S9151 Digital High Torque Rudder F3A Servo. This can only be used with 4.8V batteries.:
This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.:
![Futaba Servo Digital Rudder](javascript:h17.showPopupImage("//web4.hobbylinc.com/gr/fut/futs9151.jpg","ItemMain"))
Futaba # futs9151
$74.49
| Retail $129.99 SAVE 43% ! | |
Out of Stock Discontinued - No longer available for purchase |
Website security verified by GoDaddy.
You Might Also Like
← Swipe To View More →
Features
- Digitally enhanced microprocessors cut about 1/2 of the respons time from transmitter input to servo reaction..:
- Digital operation allows this servo to reach full power immediatel and maintain torque longer..:
- High-capacity, high-current wire with low resistance.:
- Coreless motor (a wire cage rotates around the magnet)..:
- High speed operation for immediate response.:
- Nylon gears.:
- Dual ball bearings on the output shaft.:
- Delivers high torque rudder operation for precision fixed-wing F3 pattern aircraft..:
- Dust and water resistant (Not Waterproof).:
- Black plastic case..:
- One year warranty..:
Specs
- Dimensions: 1.6 x 0.8 x 1.4 (40 x 20 x 37mm):
- Weight: 1.8oz (50g):
- Speed: .19 sec/60° @ 4.8V:
- Torque: 132 oz-in (9.5 kg-cm) @ 4.8V:
- Power Supply: 4.8V (Futaba does NOT recommend using 6V):
Includes
- One S9151 Digital High Torque Rudder F3A Servo w/Futaba J Connector and a small round servo horn
- Four Rectangular Grommets:
- Four Brass Bushings:
- Four 2 x 11mm Mounting Screws:
- One Large Round Horn:
- One Six Arm Horn:
- One Four Arm Horn:
Requirements & Suggestions
← Swipe To View More →
Reviews |
Comments
- S9151 Digital Servo Precautions,.:
- -It is best to avoid long leads and Y-harnesses especially wit standard grade wires. If problems are encountered, consider usin heavy duty wire such as Futaba's Heavy Duty Series or Hobbico' Pro Series, minimizing lead lengths, and/or removing Y-harnesses..:
- -Current Drain: Futaba S9151 Servo is specially designed for high torque and high-speed, therefore very high current drain is norma at startup. For ultimate performance when using this servo, pleas review the following points (1) When using systems with the battery fail safe function it ha a higher cut-off voltage setting which will cause shorte operation time (2) When installing the servo please check pushrod linkage to mak sure there is no binding in order to prevent excessive powe consumption and decrease the life of the motor and battery..:
- This digital servo cannot be used with the following * AM * transmitters as the servo neutral signal is: 1310us). CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series. * Otherwise they will work fine with current AM systems **: