This glue has a much slower curing time, of about 1-2 minutes. This glue makes a great gap filler and should be used when some extra strength is needed. The glue gives you some extra positioning time is needed.

Love this glue. Slow setting means you will lower your chances of gluing yourself to the part. You can really position your parts at angles. Because it is slow setting I would give this a day or two to cure. It will set in minuets. Which is good and if you need pull the part off you can. But once you have left it to dry for 24hour or more. Parts really start to setup. Removal is harder. I find this to be a excellent choice for CA thick glue.