INSTA-SET Cyanoacrylate Accelator 2oz

INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.

Hobbylinc INSTA-SET Cyanoacrylate Accelator 2oz Hobby CA Super Glue Accelerator #151
 Hobbylinc # hlc151
Retail $6.99  SAVE 21% !
Hobbylinc Item # hlc151
Features :

INSTA-SET Cyanoacrylate Accelator

Website security verified by GoDaddy.

Spotlight Review

"'Liquid Patience'"
I call this stuff 'liquid patience'. I love it. I do most of my modeling with CA gel, and using this speeds matters up tremendously. I almost never use the spray, but rather use its tube as an applicator. It is especially useful in rigging with elastic line. You put a tiny daub of CA gel where you want the end of the 'wire' to go, wet the end of the line with the accelerator, and touch that to the dot of CA gel and hold it there for few seconds. This has one 'off label' use I have found quite handy. It will destroy the tack of any sort of tape. Wet tape thoroughly with this, and after a few moments it will lift off like so much wet newspaper. No paint will come with it. This use is not compatible with an enamel finish, but is well suited to acrylics of the Model Master (non solvent) sort.

Member Gallery

(Pictures shared by our community)
User image #21187User image #33881User image #2607
← Swipe To View More →

You Might Also Like

← Swipe To View More →


INSTA-SET Cyanoacrylate Accelator


  • Hobbylinc Product Number: 151


2oz bottle

Requirements & Suggestions

← Swipe To View More →

Product Rank


"Great for model sailing ships!"
I build plastic model sailing ships. Before I discovered this product I struggled with trying to get various parts of a ship model to stay in place until the glue dried without having to physically put pressure on it, even using CA glues. Gun port covers, spars attached to masts, small cannons that were attached to railings...were all difficult to keep in place. With this product, practically any part can be secured instantly. However, I do not use the spray applicator, but rather a small brush that I dip in the bottle and then wipe on the connection that I am making. Another great feature is that it does not affect the paint, thus eliminating the need to go back and touch up parts. This product is a 'must have' for anyone who builds plastic model sailing ships.

"Works as advertized"
works. I have a small bottle of the stuff that has lasted numerous bottles of CA. it sets things up instantly. does turn the CA whitish if the CA is in a puddle or pooled up drop. can get warm. great on those hard to glue joints (like plastic to EPO, or Carbon Fiber. will help fill a gap too (but won't likely be very pretty...) spray bottle is useful if you want to get it on a larger surface. I find it hard and wasteful for most building - get a dropper bottle and then you can get it right where you need it. its worked and lasted a long time.

"Best stuff ever"
eddiewmullins (Virginia)
Okay that maybe a over statement but I still love this stuff. As soon as it hits superglue the items is glued like a rock. No more waiting, a little smelly but at that bad.


INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joint's strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

Others Also Ordererd

← Swipe To View More →