GMC Pickup with Snow Plow

This is the 1/24 Scale GMC Pickup with Snow Plow Plastic Model Kit by Revell. Suitable for Ages 10 & Older.

Revell-Monogram GMC Pickup with Snow Plow Plastic Model Truck Kit 1/24 Scale #857222
 Revell-Monogram # rmx857222
Retail $29.95  SAVE 19% !
Revell-Monogram Item # rmx857222
Specifications :
  • Scale: 1/24
  • Length: 8-1/16" (206.37mm)
  • Width: 3-3/4" (95.25mm)
  • Height: 3-3/8" (85.72mm)
  • Skill level: 2
  • Parts: 103
Website security verified by GoDaddy.

Spotlight Review

"Really fun kit"
I had a really nice time assembling this kit. The molding is top notch...very little flash and everything fit together nicely. The instructions are clear and detailed as expected from Revell, and the decals are neat. I usually stick to older model cars, but I really wanted to build a 4x4 and there aren't a lot of options out there. This was a great choice...I almost did a stock build but decided to make it into a service truck without the plow that closely resembles a truck I drove years ago at one of my first jobs on a landscaping crew. There are plenty of options for you to build a completely stock looking truck or a service truck as pictured with a plow and everything. Or, if you want, this kit will easily lend itself to extensive modification...I've toyed with the idea of ordering another one and kit bashing some parts to make a Military truck replica.

Member Gallery

(Pictures shared by our community)
User image #5663User image #9545User image #3001User image #15631User image #4175User image #10103User image #16065User image #10909User image #13037User image #16929User image #5665User image #3003User image #15633User image #4177User image #10105User image #16067User image #10911User image #13045User image #16931User image #5669
← Swipe To View More →

You Might Also Like

← Swipe To View More →


  • Highly detailed plastic pieces molded in white and clear.
  • Chrome plated parts and soft black tires.
  • Full detail snow plow and pickup bed mounted roll bar with drivin lights.
  • Separate frame pieces and 4 wheel drive suspension.
  • Waterslide decals with stock and custom graphics.
  • Illustrated instructions.


  • Scale: 1/24
  • Length: 8-1/16" (206.37mm)
  • Width: 3-3/4" (95.25mm)
  • Height: 3-3/8" (85.72mm)
  • Skill level: 2
  • Parts: 103


One plastic model

Requirements & Suggestions

← Swipe To View More →


"Hey, snow plow!"
Bob S. in IA
OK, when was the last time you built a pick-up kit that included a snow plow? :D Lots of possibilites for the beginner to scratch builders. I had a real '78 with a plow I used to rebuild every summer after beating it up in the winter. For this build, I'm going to hinge the lift part of the plow and add a hyd. lift cyl made from two sizes of K+S alum. tubing and some shrink tubing (for the outer cyl. detail). BTW, for you detaillers, check out prod # AKI229. Much more scaled for the lift chain for this kit than the Verlinden chains (and its pre-rusted!!). I'm building the truck itself fairly stock (out of the box) and if I can get all the plow bits to work I'll get a second kit to build a monument to my old real truck, Old Blue. About the kit, the basic model is nicely molded. Some parts may be tricky for beginners (bed and tailgate, rear cab bulkhead, trans and tranfer case and drive shafts) but take your time and test fit all the parts before glueing them together. It would have been nice to include the option for an older carb, air cleaner, and manifold but this is an easy fix for kit bashers. The frame and running gear really set this kit apart from other pick-up truck kits. The plow part of this kit is begging for some details and this might the project if you want to start learning to scratch build and detail models.

"Made in China"
Bill Z. (Hermitage, PA)
I have not worked on scale models in about 15 years. When I last did, the vast majority were made in the US. Now I see that most are made in China. This model did not fit as well as I had expected and that, I believe, is due to the manufacturing in China. You will need to modify some areas for the body and bed to fit properly. But, it did turn out pretty good.

"Plow Kit"
First of this is a great kit I have ordered many and I love them there are about 116 parts on the kit so there are quite a bit less then I expected but that's okay I had a lot of fun with this kit and will continue to have fun with it pros on this truck is that you can take the plow pieces and out them on basically any truck kit and another pro is that it has an engine unlike the GMC wrecker kit cons in my opinion is probably the plow that there isn't a little more detail and if you put it were it is supposed to go it is really far forward so I don't put it on the mount but other then that it is a really cool kit fits well and looks good on the shelf and it comes with a Jerry can and a spare tire plus the plow and roll-bar and bed rails which I used on a 55 Chevy step-side kit I have and the decals on this kit comes off easy and stick well there were no regrets with this kit and I highly recommend this kit and many others in the truck series

Others Also Ordererd

← Swipe To View More →