G11 Brushed Electronic Speed Control

This is the Tekin G11 Sport Electronic Speed Control. This is a Forward/Brake Speed Control (no Reverse).

Tekin-Electronics G11 Brushed Electronic Speed Control
 Tekin Electronics # tektt1040
$55.39
DISCONTINUED
 
Retail $89.00  SAVE 38% !
Tekin Electronics Item # tektt1040
Features :
  • No turn limit if using fewer than 8 cells.
  • Adjustable drive and brake frequency.
  • Limitless multiple setup tuning options for every critical operatin parameter, over 600,000 different settings.
  • Multible adjustment modes including Brake Minimum, Drag Brake Current Limiter, Throttle and Brake Frequency.
  • Zero loss solder drop fuse link.
  • Gold plated copper soldering posts.
  • Built-in self-test mode that checks all major systems on the ESC.
  • Pre-installed ON/OFF switch.
  • Pre-Installed female bullet motor connectors.
  • Pre-Installed Tamiya style connector.
  • Pre-Installed radio plug (Futaba J-style).
  • 120 day limited warranty.
Out of Stock
Discontinued - No longer available for purchase
Website security verified by GoDaddy.

You Might Also Like

← Swipe To View More →

Features

  • No turn limit if using fewer than 8 cells.
  • Adjustable drive and brake frequency.
  • Limitless multiple setup tuning options for every critical operatin parameter, over 600,000 different settings.
  • Multible adjustment modes including Brake Minimum, Drag Brake Current Limiter, Throttle and Brake Frequency.
  • Zero loss solder drop fuse link.
  • Gold plated copper soldering posts.
  • Built-in self-test mode that checks all major systems on the ESC.
  • Pre-installed ON/OFF switch.
  • Pre-Installed female bullet motor connectors.
  • Pre-Installed Tamiya style connector.
  • Pre-Installed radio plug (Futaba J-style).
  • 120 day limited warranty.

Specs

  • Input Voltage: 4-10 Cells
  • On Resistance: 0.0008 ohms
  • Max Current: 280A
  • Throttle Frequencies: Adjustable from 1-11kHz
  • Brake Frequencies: Adjustable from 1.5-15kHz
  • BEC: 6.0V/5.0A
  • Current Limit: 10 to 90A and bypass
  • Power Wires: 12 gauge silicone
  • Weight (with wires): 1.25" (35 grams)
  • Length: 1.85" (47mm)
  • Width: 1.25" (32mm)
  • Thickness: 0.65" (16.5mm)
  • Motor Limit: None if using fewer than 8 cells
  • 12T limit if using 8-10 cells

Includes

  • One G11 Electronic Speed Control
  • Three 0.1uF Capacitors
  • Three 1x1" pieces of servo tape
  • Three 5.5" long zip-ties
  • Two servo connectors (KO and JR)
  • Three Tekin logo decal sheets in various colors

Requirements & Suggestions

  • Installation following the included instructions
← Swipe To View More →

Reviews