23ml Jar of Tamiya XF-63 German Gray color Acrylic Flat (Matt) Paint.

The White sheets are used to construct buildings for your railroad diorama's and layouts. They may also be used for various scratch craft projects and miscellaneous projects.

This is a 3 oz. (85 g) Can of Lusterless Flat Finish Spray Paint.

This is a 1/2 oz (14.7mL) glass jar of Enamel Steel Paint from Testors.

23ml Jar of Tamiya XF-Metallic Gray color Acrylic Flat (Matt) Paint.

23ml Jar of Tamiya X-1 Black color Acrylic Gloss Paint.

This is a 5/8oz Tube of Fast Wood Cement for Wood Models from Testors.

23ml Jar of Tamiya X-2 White color Acrylic Gloss Paint.

23ml Jar of Tamiya X-7 Red color Acrylic Gloss Paint.

This package includes Five Tubes of 1/8 Round Brass Tubes by K&S Engineering.

100ml Can of Tamiya TS-29 Semi-Gloss Black Synthetic Lacquer Paint.

This is a 1/2 oz (14.7mL) glass jar of Silver Gloss Acrylic Paint from Testors.

Supplies that picture-perfect model. The best of everything for building the highest quality models. Great gift for the experienced modeller.

The White sheets are used to construct buildings for your railroad diorama's and layouts. They may also be used for various scratch craft projects and miscellaneous projects.

This is a 1/2 oz (14.7mL) glass jar of Enamel Wood Paint from Testors.

This is a tube White Plastic Model Putty from Tamiya.:.

This is a Tubing Cutter from K&S Engineering.

This is a 5/8 Oz. Tube of Contour Putty from Testors.

180ml Spray Can of Tamiya's Surface Primer L (Gray) for Plastic and Metal.

This is a 1/2 oz (14.7mL) glass jar of Semi-Gloss Black Acrylic Paint from Testors.

This is a 1/2 oz (14.7mL) glass jar of Flat Aluminum Acrylic Paint from Testors.

This is a 1oz Jar of Liquid Plastic Cement from Testors.

This is a 1/4oz (7.4ml) Glass Jar of Semi-Gloss Black Enamel Paint from Testors.

INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. .

This is a 1/2 oz (14.7mL) glass jar of Flat Light Ghost Gray Acrylic Paint from Testors.

This is a pair of 4-7/8" Side Cutters from Tamiya.

This is the Tamiya Weathering Master Paint Set.

23ml Jar of Tamiya XF-66 Light Gray color Acrylic Flat (Matt) Paint.

This is a 1/2 oz (14.7mL) glass jar of Enamel Insignia Red Paint from Testors.

MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. . Learn about how to Select a Super Glue.

This is a Precision Putty Applicator used for applying putty to models.

These are Round Solid Styrene Rod.

The Model 250 single action, external mix, bottom feed spray gun is great for any job requiring a simple, yet effective spray. The Model 250 is basic enough for children, (ages 8 and up) to use with minimal adult supervision, yet effective enough for adult use. This gun is perfect for jobs requiring large overall coverage with medium to heavy viscosity materials. Modeling, school projects, home improvement projects, workshop jobs, ceramic underglazing, fogging, texturing and stenciling can all be handled by the Model 250. The spray pattern can be adjusted from 3/4" to 2" simply by turning the paint tip. The Model 250 uses 3/4 oz. or 2 oz. capacity jars.

This is the 6 x 11 Thin Sheet New Improved Chrome Foil by Bare Metal Foil.

This is a Package of 5 Glue Tips from Testors.

This is a 4 oz (118mL) Plastic Bottle of Thinner used for Thinning Acrylic Model Master Acryl Paints.

This is a 1oz Applicator of Clear Parts Cement & Window Maker from Testors.

This is a 3 oz. (85 g) can of White Primer Enamel Spray Paint.

This is a Swivel Head Pin Vise with 4 Chucks from Excel.

This is the Pastel Weathering Set A from Tamiya. A simple way of adding realistic weathering.

100ml Can of Tamiya TS-13 Clear Synthetic Lacquer Paint.

100ml Can of Tamiya TS-14 Black Synthetic Lacquer Paint.

This is a 1 oz (29.5mL) glass jar of Flat Clear Acrylic Paint from Testors.

This is an Angled Tweezers from Tamiya.

This is a 1/2 oz (14.7mL) glass jar of Clear Red Gloss Acrylic Paint from Testors.

This is a 1/2 oz (14.7mL) glass jar of Gloss Black Acrylic Paint from Testors.

This is a Package of 48 Pieces of 1/8" x 1/8" x 24" Basswood from Midwest Products Co.