LiPo Onyx 2S 7.4V 5000mAh 25C Hard Case Deans Plug
This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery with the Dean's Ultra Connector.
Dura Trax # dtxdtxc1864
$37.89
Retail $64.98 SAVE 42% ! | |
Out of Stock Discontinued - No longer available for purchase |
Website security verified by GoDaddy.
Features
- Ideal for 1/10 scale car applications.
- Prewired with Dean's Ultra Connector.
Specs
- Voltage Rating: 7.4V
- Rated Capacity: 5000mAh
- Discharge Rating: 25C continuous
- Dimensions: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
- Weight: 10.2oz (288g)
- Discharge Lead/Connectors: 12AWG Wires, Dean's Ultra
- Balancing Connector: ElectriFly
- Watt Hours: 37Wh
- Dura-Trax Product Number: DTXC1864
Includes
7.4V 5000mAh 25C Hard Case LiPo Battery with Dean's Ultra Connector
Requirements & Suggestions
- Balancer and LiPo compatible charger or LiPo charger with built-in balancer such as the Onyx 235, DTXP4235
← Swipe To View More →
Reviews |
Comments
- ALWAYS use a LiPo-approved Charger.
- ALWAYS use a LiPo Cell Balancer.
- NEVER Charge over 4.2V per cell.
- NEVER Charge at currents greater than 1C.
- NEVER Charge through the "To ESC or "DISCHARGE" lead.
- NEVER Trickle Charge.
- NEVER allow to Discharge below 2.5V per cell.
- NEVER disassemble or modify pack wiring in any way or puncture cells.
- NEVER place on combustible materials or leave unattended durin charging.
- ALWAYS Charge in a fireproof location.
- ALWAYS set charger's output volts to match battery volts.
- ALWAYS keep out of reach of children.
- All weights include wire leads and plugs.
- All weights +/- 1 g.