.25LA-S C/L Non-Ring E2030 Muffler
This is the O.S. Max .25LA-S Natural Finish Control Line Engine with Muffler.:
![OS-Engines .25LA-S C/L Non-Ring E2030 Muffler](javascript:h17.showPopupImage("//web4.hobbylinc.com/gr/osm/osm12361.jpg","ItemMain"))
O.S. Engines # osm12361
$72.29
| Retail $119.99 SAVE 40% ! | |
Out of Stock Discontinued - No longer available for purchase |
Website security verified by GoDaddy.
You Might Also Like
← Swipe To View More →
Features
- LA-S series engines Control Line engines replace the Carburetor wit a Venturi that keeps the engine running at a constant speed.:
- Remote Needle Valve reduces chance of injury from spinning props.:
- Nylon backplate mount and ratchet spring help hold settings agains creep caused by vibration.:
- An O-ring helps seal the needle from fuel and air leaks.:
- Heavy-duty webbing reinforces the one-piece crankcase in high stres areas..:
- TWO YEAR WARRANTY against manufacturing defects in parts and workman ship.:
Specs
- Displacement: 4.07cc (.249 cu in):
- Bore: 18mm (.709):
- Stroke: 16mm (.630):
- Output: 0.6 PS, 0.59 HP @ 15,000 RPM:
- Practical RPM: 2,000 - 16,000 RPM:
- Weight: 185.5g (6.54oz):
- Crankshaft size: 1/4-28:
- Distance between mounting tabs: 1.89 (48mm):
- Distance between mounting holes on opposite side: 1.46 (37mm):
- Distance between mounting holes on same side: .59 (15mm):
- Width of crankcase below mounting tabs: 1.10 (28mm):
- Height from bottom of crankcase to top/cylinder head: 2.93 (74.4mm):
- Length from end of crankshaft to backplate: 3.43 (87.1mm):
Includes
- One .25LA-S Control Line Engine with #E-2030 Muffler:
- Two 2.5 x 24mm Phillips head muffler mounting screws:
- #A3 Glow Plug (OSMG2690):
- Decal Sheet:
- Instruction Manual:
Requirements & Suggestions
- Fuel: 10% to 20% Nitro and 18% lubricant content is recommended:
- Prop: Break in: 9x6:
- Aerobatic and Sport: 9x6, 10x5:
← Swipe To View More →
Reviews |
Comments
Needle Settings: High Speed: 1.5 turns out from fully closed Mixture Control (low speed): Tip of the needle half way across the small hole in the front of the carb:
Others Also Ordererd
← Swipe To View More →