Aeronca C-3 Kit
This is the radio controlled, electric powered Dumas Aeronca C-3 Park Flyer Kit.
Dumas # dum1813
Website security verified by GoDaddy.
Member Gallery
(Pictures shared by our community)
You Might Also Like
← Swipe To View More →
Features
Construction: Hand selected laser cut balsa Vacuum molded nose cowl Rudder Control: Pull-pull cables Elevator Control: Wire pushrod Servo Placement: Mounted in rails on fuselage Landing Gear: 1/16" diameter wire front,. 041 diameter wire rear, requires bending.
Specs
- Length: 22" (559mm)
- Wingspan: 40" (1016mm)
- Wing Area: 329 sq.in. (21.25 sq dm)
- Airfoil: Flat bottom, high wing placement
- Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the wing at the fuselage side
- Control Throws-
- Elevator, Up and Down: 3/4" (19mm)
- Rudder, Left and Right: 1" (25mm)
- Dumas Product Number: 1813
Includes
All balsa, lightweight colored (black and yellow) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, and acetate sheet for windows
Requirements & Suggestions
- GWS IPS (indoor power system) motor with "A" ratio gear drive
- GWSG2023
- 3 channel radio system
- 2 micro servos
- 5A ESC w/BEC GWSM2059
- 2 cell 700mAh LiPo battery
- GWS 8x6 prop, GWSQ2017
- Building and field equipment
← Swipe To View More →
Others Also Ordererd
← Swipe To View More →