Reviews : Revell-Monogram P-38J Lightning

P-38J Lightning
Revell-Monogram P-38J Lightning

Leave a Rating!

OR

Write a Review!

Write a Review

Sort

5-Star: 14 (67 ratings)
4-Star: 10 (19 ratings)
3-Star: 11 (5 ratings)
2-Star: 2 (8 ratings)
1-Star: 1 (0 ratings)

Reviews

Poor Parts Fit
I have come back to the modeling hobby after many years away from it. I bought this kit as a simpler break from a longer-term, more complex sci-fi modeling project. Although I'm not quite done with it, I'm nearing completion of this model, and wanted to get my thoughts about the kit down while they were fresh. I've always wanted to build a P-38, and I wanted something low-cost because it is largely a practice project. This kit seemed like a good fit. Unfortunately, the price is just about the only thing about this kit that fits well. The area around the nose is particularly bad. The fit of the nose and the gun doors onto the fuselage ranks among the worst fits I have seen on any model, ever. They manage to be both too big and too small in various areas, requiring a ton of filing and sanding to remove interferences, as well as a lot of putty work to fill gaps. While trying to clean up some of the parts fit, the hinge for the opening gun door broke. Since there was considerably more material in the flash that I trimmed from the hinge pins than there actually was in the pins themselves, that wasn't a huge surprise. I tried repairing it with something scratch-built, but couldn't quite get the fit to work out right. Now I have given up on the opening gun bay, and will use that as an opportunity to seal up the gaps around the door. It is interesting to note that even the box photos seem to show this area filled and sanded smooth, even to the point of removing the molded rivet details, to hide the poor fit of the doors. It would seem that even Revell's own artists struggled with these parts. The loss of the gun bay door was annoying because I had already partially detailed its interior, but isn't that severe of a loss, since I am building the model in flight and mounting it to a stand anyway. However, that brings up another significant fit issue - the model isn't really designed to be built with the gear doors closed, and they don't actually fit in the closed position. It took a significant amount of both trimming and filling to get it to look somewhat reasonable. Also, someone at Revell thought it was a good idea to mold copyright information onto the bottom of the rear stabilizer, in a way that makes it practically impossible to sand off without removing surrounding detail. The kit offers three options for building different versions of the plane, as well as some additional armament options (rockets, bombs, drop tanks, etc.). This kit provides nice flexibility, but unfortunately the quality of the parts from these very old (1960's) molds makes it very frustrating to make the results look good. If you just want to slap a kit together and live with how it fits out of the box, this kit is probably okay. If you have any perfectionist streak in you at all, you will probably find it frustrating. Ultimately, I think I will end up with something that looks acceptable, but will have spent far more time getting it to that point than I would have if I had spent a little more money on a higher-end kit.
A Very Detailed Build!
What an awesome build! Took me 3 weeks at about 4 hours every other night working on this one. Very detailed kit from what I'm used to, and with 118 pieces each one receives at least one paint color if not multiple. CONSTRUCTION - The most time I spent I found was cleaning the parts from the sprues and checking everything as I went along for fitment. The rest was spent painting and gluing. I was a little disappointed that the wheel wells lack any detail up inside (and it's visible if you turn the model upside down) but the rest of the kit made up for details. The fuselage can definitely use some putty as there will certainly be small gaps after gluing. The landing gear assembly was not clearly explained in the instructions either, I spent quite some time scratching my head. The glass canopy was a better fit than most Revell models, but still the hinged top is very very delicate and the hinge on mine broke and fell down inside the plane right as I was applying the last decal - ugh! So I opted to use clear parts glue and just glued it in the up position. Will do. My favorite part was the rocket launchers, however they are time consuming to say the least when it comes to painting. PAINTING - I do not own an airbrush but after this kit I will certainly be looking into one only on the basis of the silver body (I did the standard version, not the Pathfinder or Night version) but this is no ones fault but my own. Brushing a nice even coat of silver still did not produce the nice smooth effect I was hoping for but nevertheless the finish still turned out quite nice. Every part in the kit does receive at least one paint color, if not multiple. And if your not building the Pathfinder Bomba Dear version there is no need to buy any blue paint as I found out. DECALS - we're great, my only complaint is there could have been more! I really like decals, the more detailed, the more accurate the build looks and in this case there was only a handful that applied to the standard Marge build. But that's ok. Overall a great kit for anyone but patience is needed for a lot of it. Very detailed!
Painful P-38
The Revell P-38 is a nicely priced model. If you are new to the hobby or returning, please don't start with this one. Despite my best efforts, I wasn’t able to make it look very good primarily because of fit issues. As the kit offers different versions of the Lightning, that might explain the issues getting the fuselage to come together properly. I modeled Maj Bong’s version and the nose fit of the fuselage left a LOT to be desired. The wheel bays have no detail and the cockpit is somewhat sparse (in other words I wouldn’t leave the pilot out) unless you kit bash. Be prepared for some work painting the canopy (has nothing to do with this particular kit – the P-38 has a complicated and detailed canopy) and if leaving it open, some work to make sure everything lines up correctly. The version you see depicted on the Hobby Linc page doesn’t have the red spinners, red tail markings, or red wing markings either so I would recommend you do some research on the subject before you build. So, if the P-38 is your plane, you want a challenge, and to work on your building skills, at a very reasonable price, this is your kit. If you want less frustration go with one of the other 1/48 Lightning choices.
Good potential, but has issues
This kit has a lot of potential. First of all, the kit allows you to build three different versions of the P-38; a Pathfinder version, a night fighter version, and a more standard fighter version. Unfortunately, that does cause problems with the directions, because they are not always clear which version it applies to. Not only that, but the sequence on the directions did not really make much sense. It is tail heavy, but there is an extended piece of plastic from the tail to help counter that (the directions instruct you to remove it, but then your plane will be sitting on its tail). There also was a lot of trimming required to get rid of excess plastic from the parts. Throughout most of the build, I did not have many problems with the fit of the pieces. However, that quickly ended when I got to the nose section. It was almost funny how bad the fit was (looked almost like a beak at first), and no amount of trimming was going to help it. The hood over the gun block also fit poorly, although it can be fixed to a certain degree. However, the fact that the hood opened up into the detailed gun block was a nice touch. In the end, with some extra work, you can make a pretty good looking model!
The worst of the 1/48 P-38 kits.
This kit from Revell of China has been around in one form or another since the 1960's. It is a old kit that can't compete with more modern releases. Hands down the worst 1/48 scale P-38 kit you can buy. Even considering the price its not a good value. The downsides are as follows: - Poor fitting parts that need a lot of filler and sanding - Raised panel lines - Ejector pin marks - Excessive casting flash - Revell China Etc. molded in raised letters on the outside of the A/C that need be sanded off - Zero wheel well detail. Just a empty void - Nose is a mess requiring lots of trial and error not to mention putty to make it look respectable - Optional versions require a lot of surgery/cutting if your going to build one - Canopy frames lack definition making it near impossible to mask and spray. - Attachement points for landing gear doors non existent. - Instructions are vague and lack clarity. If your new to modeling and don't wish to spend a lot of money I still wouldn't recommend it. If you want to hone your skills with seam filling and sanding of poor fitting parts then maybe, otherwise better choices abound.
Not Fun For Me
Most of my builds have been fun and went together well. This was not one of those. I was frustrated and all thumbs as soon as I opened the box. Finally deciding on the night fighter version I saw some major cutting had to be done so I combined the versions and went with it anyway. The glossy finish did not look well and showed poorly. The instructions between the three versions confused me and I lost my focus. The flashing on this product was a pain to clean up. Believing the hinge on the clear canopy to be flashing I trimmed it off causing problems later. Several parts were installed too early in the build which lead to easy breaking off. The gun barrels fitting in the nose, the front panels over the guns all fit poorly. Even the decals for the night fighter were not clear and looked out of focus. A seasoned builder would not consider these as problems, maybe, but as a retiree just looking for fun things to do, I should have passed on this kit. If one looks at my photos, they may see all my frustrations.
Fun but confusing
This was a fun model to put together, but, because of the fact that there were three options for building (fighter, nightfighter, and radar interceptor), the directions were quite confusing. One option was to add a second cockpit for the radar operator which required that you cut open part of the fuselage, which is a dangerous option for a beginner like myself. Thus, I chose not to take this option in fear that I would cut up the model too much and destroy it. The directions for all three options are included in each step, as opposed to having a full set of directions (in order) for each version. Thus, this caused great confusion for me (for example, step one had directions for Option A, Option B, and Option C, and this continued throughout the directions. It was as if Revell wanted to save paper, but, in doing so, they made this model quite confusing. Nonetheless, if you go the safe route, the final product will b quite pleasing. Enjoy!
Another Great Model from the Past
This is by far one of the best kits for a WW2 aircraft, complete with parts for 3 versions. Pathfinder bomber, RADAR interceptor or fighter, any of which would prompt the builder into making all three versions, which is exactly what I might just do! The first thing to do is inventory all the parts, everything is subject to loss, missed packing and other things that plague all modelers. Then dry fit all of the parts. Older Monogram/Revell kits have the tendency to have fuselage alignment problems even with edge pins to help in alignment, double check with this model as the tail booms had problems in the past, I think I built one of these kits about 40 years ago and the molding didn't change to the better. The model decal sheet neatly portrays two of the famous pilots and crew of two of the versions and cannot be beat as far as overall fantastic and historically accurate. I highly recommend this kit.
jewel of a model
By: bkatz4
while a challenge to build, this kit blew me away! it always amazes me how the model engineers capture the essence of all the aircraft they design a model kit for. in this scale, the p-38 requires some skill to craft the kit into a showpiece that will draw your attention. once again revell supplies enough wow factor with opening panels and exquisite details that make you want to examine the finished model just a little more. i had a blast crafting this kit, and would recomend it to anyone. alittle patience goes a long way, but it's definitely worth the time and attention. bang for the buck is off the charts! i will consider buying the kit again to build one of the other versions that the kit supplies extra parts for. i had a tough time deciding which version to build, so i'll most likely take a second or even third crack at this one. awsome kit.
Not for the Beginner
Once you work out the instructions, as they list 3 different options, which if you're not careful can send you scratching your head, this turns out to be an enjoyable, but some what challenging build, there are quite a lot of details to keep you on your toes, I chose to build this with the gun compartment open so you could see the guns and magazines, and in doing so I had to cut the decal that went on the nose, this took some doing but I think it turned out well. Cutting the rear section out to add room for the bombardier was very nerve wracking and I do not recommend this for the new or the faint of heart, it would be terribly easy to destroy this set at that step if you don't use but the utmost of caution. I recommend this for someone with a few builds under their belt
looked easy but wasn't
had more trouble with this model than you can imagine.i took up modeling to help pass the time in retirement, so basically I am just a beginner. I thought this kit would be fairly easy. I had thought I had progressed a little in my skills and on each new model I really try to do better than the last but this one really set me back. first, I had EXTREME difficulty with the whole nose section. guns didn't want to line up and the hinged doors over the guns was a complete disaster, however I can see from the photos that others have not had the same problems. the front wind screen didn't come close to fitting. I ended up trying to fill the gaps with testors clear parts cement but it didn't look good. am too embarrassed to submit photos. maybe I just nee to stick to armor.
great kit
Once you get the nose problems figured out, this thing is amazing. I used fishing weights in the nose and it stands as it should. there were no real problems putting it together or painting it. I used spray cans for the big parts and a good brush for the smaller parts. the cocpit is pretty easy to buld, the only confusing part was getting all the guns in the nose to line up like they were supposed to with the nose cone. a bit of bending and they went right in. there was no need for filler on this kit at all either. Everything went together as it should have. this thing is AWESOME. not a fan of Revell but it was one of my first kits to build after starting back into the hobby after a 20+ year break.
An oldie but a goodie... Takes work, but can get good results
First produced in the '60s, the Monogram/Revell P38 is a real blast from the past... When originally released, it was state of the art, with a choice of several versions and great detail. Time has not been kind to the kit, and modelers used to new shake and bake kits will be frustrated by fit issues. That said, with patience it can be built into a fine replica. With each model, the modeler learns a lesson... the lesson for this kit is patience, Grasshopper. Weight in the nose (or a tail support) is definitely required to avoid a tail sitter. Definitely not a beginner's airplane, but if a modeler wants a challenge that can be overcome with some skill, the price is right.
Typical of Revell value for money
First let me say, the kit builds well and the three options for the build are a great bonus. The detail is excellent and the instructions are clear. However some of the modifications required to build the nightfighter version are meant for a seasoned modeller not really a 10 year old beginner. The parts fit reasonably well, but you will need some putty and sandpaper to hide some seams and clear away some overflash (especially on the air crew). All things considered this kit represents excellent value for money as with a little care you will wind up with a fine representation of this versatile plane.
Monogram P-38
This is an older kit I remember once making back in my teen years. I liked the option of making 3 different variants (see decals) with some heavy adulteration of the main kit's parts. Very hit or miss with the parts fitting well with this kit, and I think that might have to do with the age of the kit which hasn't been updated for decades. There was a lot of flash on the parts which was sort of annoying. That said, it is a bigger kit so you get a bit more bang for your buck. I found assembling the canopy to very difficult on this kit. All in all, it was worth building not being to expensive.
ways to make it look more realistic
this kit is very tail heavy. but if you go to your local pet store and buy some weights that are used to hold plant life down in aquariums, they are little pieces of lead, if you put them in the nose of the plane as you are building it the will make it so that you can cut off the little plastic piece in the back of the plane and make the plane look more realistic. make sure that you have added enough weight before you cut that piece off though. and also make sure you take a little more time with the landing gear to build it correctly so that parts don't bend or sag in time
MyThoughts on Revell's P-38 Lightning
I did the night fighter variant with this model. Revell's P-38 had awesome detailing. One could lift a cover over the gun compartment (exposing the five guns); add optional drop tanks, bombs, and rockets; and choose from three different variants, each with their own set of decals. All had well diagrammed instructions. I would definitely recommend this plane to anyone with a fettish for warplanes. However, Parents, you should definitely help your kids if they choose the night fighter as this variant requires some tricky cutting away of the fuselage.
Not a bad model
This is more of a starter model. I have built many of these, they are quite easy and do not require a lot of skill, its just a very basic Lightning. This model is not too detailed, the plastic is a little brittle and can break easily and the prop blades are prone to breaking just from handling while assembling the model. Although it has some bad points, i still recommend it because its the right price for what your getting and if you have taken a break from building, this is a good one to get back in the groove with.
Good Practice Model
I just got back into this hobby and I have been buying Revell Monogram models for practice and this model is a good example of why. Need practice puttying, sanding, difficult canopies, cleaning up flash? This guy won't let you down. Like I said I have been using this brand for practice and it's time to move on after this. This will be the last Revell/Monogram model I will purchase but I'm glad they offer inexpensive models that a person can use to practice skills on before moving on to better quality products.
Lightening
Excellent kit. Revell was very good on replacement parts. First kit in 30+ years and I thoroughly enjoyed myself. Be careful on the small parts, leave part of the sprue attached until glue fixed, I lost the wing light cover and one of the nacelle covers into the body of the kit on test fitting(which Revell replaced). Good size for beginning back into modeling, not too big nor too small. Glad it has a pilot with the kit. Left windscreen open to view inside of cockpit. Love the finished kit...
Revelle 1/48 scale P-38 Lighting
Beautiful model of Lockheed's wonder plane.Good detail, and excellent decal sheet. I did add some detail to the main gear wells as this area is lacking any detail. The gun compartment is nicely detailed.I finally built the fighter version, I have built several of these kits and I always seem to build either the pathfinder or night fighter version,I have a weakness for the night fighter. I would highly recommend this kit to anyone with a little modeling experience.
Will test your skills
This is an old kit and the parts show it. The molds are showing their age by leaving a lot of flashing that has to be very carefully removed. Watch out that you don't remove something that looks like flash but isn't!. Parts don't fit all that well either so I don't recommend this kit as a father son kind of build (both of you may go crazy). It's not all bad though, If you have the patience and the skill, its an inexpensive way to add a P-38 to your collection.
should be much better. terrible fit
the kit, for Revell, is ambitious in its detail, especially clear parts. The attempt falls on its face, It has a terrible fit, especially the fuselage and canopy; horrible. I don't know how the persons who rated it highly are smoking something funny If it fit together, even half way, it could have been a very nice kit for the money. As it is, I would pass, unless you like a challenge or are a masochist.
P-38J is a great plane to model
The first pro of this model is the chance to vary color and build. The second one is that it was easier to put together than I thought. All sections fit well and two engine fusalages fit well if you use a support for part of the wings coming off the pilot section. Even a corner of the box the model came in was good enough. Decals were fine, clear parts fit fine, and overall a very good version.
poor fitting
fitting this together was a struggle tons of putty used... worst Revell model Ive built. but it turned out good with much effort and time... even for a beginner it would pose problems i would assume. liked the price point tho as models are getting so expensive and on a limited income i suppose i should expect a lesser quality model as far as fit is concerned... are they going out of business ?
Good overall kit
This is an older Revell/Monogram kit I built as a kid and decided to do again. Great memories. A bigger kit and fun to build, I did the droop snout Bomba Dear version. Parts sometimes hard to fit and in the description on the page it says has a detailed Allison engine which it does not. Overall a fun kit and 4 stars. I recommend to any modeler who enjoys building the great war birds of WW2.
A smooth build.
Model did go together well, and parts all seemed to be fitting well and molded well. First model built since a long hiatus from model building, could've turned out a little better but that's no fault of the company, just my own. Fun model to put together and a light challenge but all steps seemed fairly smooth overall with no major areas that were to tough.
get what youpay for
Not the best 1/48 P 38 kit but maybe the cheapest out now.. My example had some flash. Nose is issue. (See other Reviews) But it is not bad for the price. different options all require skill and patience to do justice. to them. Kind of kit I stash for when just want to model to keep occupied With work it makes a good . not great model.
GREAT USA HEAVY FIGHTER MODEL
I built this for my cousin when I was a teen. A nice sized aircraft with great details, especially the superchargers on engines and all the additional rockets under the wings. You cannot beat REVELL MONOGRAM for bang for the buck models. Definetly I would recommend this even to kids, just have patience, and paint all parts seperate
Fun and rewarding build
Like the Other reviews stated putting lead in the nose of the plane during construction will balance the model so it sits on the gear properly. Probably need about 1/2 ounce of lead. The Canopy construction is pretty tricky. Overall a fun and challenging build with several options for the intermediate modeler.
Old Kit
This kit is old and doesn't look as nice without extra effort from the modeler. In my case, I used my rivet and panel line tool to cut in these extra details to make it look nicer. I also got some photo-etch to make it look even better. Even then, the kit looks a bit dated. Still a nice kit for the price.
DO NOT BUY THIS KIT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The flashing on this was terrible. Very bad fit for all of it. The clear parts were a joke! I almost threw it away two times and then in a fit of rage that someone would sell this model from molds made in 1963! I have built many kits so I did know what I was doing. Do not waste your money on this kit.
Overall a very good build
To overcome the nose heaviness of this model I took some clear plastic sprue, heated both ends and flattened them and glued one end to the bottom of horizontal stabilizer. The clear plastic is very inconspicuous and does not detract from the overall appearance of this great plane.
it built up great for me.
The kit I got built up great. it fit very well and made a beautiful display. I word it that way because its an inexpensive kit made by a company whose quality is spotty most of the time and good only some of the time. some of the best and worst kits I have gotten were revell.
Good WWII kit of the P-38J
Looking at the various model pictures submitted for this kit, it is a good build in any of its configurations. While not entirely pleased with the fit of the parts, working around the shortcomings is relatively easy.
Awesome Kit
I built one when I was young. I loved building this one with my son bringing back great memories.
1/48 P-38J Lightning
This is very detailed and easy to build. Its a good kit and its cheap too.
buy
i thought that this model was really cool and I loved it