Latex Rubber

Make Your Own Rocks or Other Molds With This Ready-to-Use Latex Rubber from Woodland Scenics. This is the 16 oz bottle.

Woodland Latex Rubber 16 oz. Model Railroad Mold Accessory #c1204
 (18)
 Woodland Scenics # wooc1204
$15.89
 
Retail $19.98  SAVE 20% !
Woodland Scenics Item # wooc1204
Features :
  • Formulated to be thin enough to seek detail and thick enough to be durable.
  • Create long-lasting molds with just a few coats.
  • The Latex Rubber can be applied to almost any surface to duplicate that surface in exact detail.
  • These rubber molds will be durable enough to enable you to make many castings from each mold.
  • Cleans up with soap and water.
  IN STOCK
Website security verified by GoDaddy.

Spotlight Review

 
"Latex Rubber 16 oz. Review"
dl34667
you can copy anything with imagination ,tunnel portals, stone walls, buildings, cobblestone roads, diarama bases,ect. excellent product for railroading & military diaramas.... I use 5 coats not 3, 30 min to hour each coat to dry then let set to 5 to 7 days for hard sharp lines...to clean water is, but gas or thinner is much better if you want your brush to be like new again,,, my experience with product has been very good, I have many molds which I use over & over on my train & military layouts.....this is the product of imagination......have fun...

You Might Also Like

← Swipe To View More →

Features

  • Formulated to be thin enough to seek detail and thick enough to be durable.
  • Create long-lasting molds with just a few coats.
  • The Latex Rubber can be applied to almost any surface to duplicate that surface in exact detail.
  • These rubber molds will be durable enough to enable you to make many castings from each mold.
  • Cleans up with soap and water.

Specs

Volume: 16 fl oz

  • Woodland Product Number: C1204
  • Walthers Product Number: 785-C1204

Includes

1 Bottle of Latex Rubber


Requirements & Suggestions

  • Paint Brush
  • Gauze Strips
← Swipe To View More →


Reviews

  
 
"Excellent Quality"
garyr (Tampa, FL)
I used this to make molds and to line a water-working stream. It is easily applied and removed from the mold source and easy to apply to the stream. Dries within a couple hours. Be sure to use 3-4 layers if you use it to line streams. Directions suggest to add gauze in between layers when making molds. It really helps

 
"Latex Rubber"
episode.6
Product did not perform. Appears to have been expired, (consistency of the latex was that of a heavy paste). Was expecting a more fluid product.

Comments

If you're wanting to make castings, you'll need to use Lightweight Hydrocal (WOOU1501).

Others Also Ordererd

← Swipe To View More →