200-3 Airbrush Set with Propel
The Model 200 NH bottom feed single action, internal mix airbrush offers the ease of single action operation while providing the fine spray pattern of internal mix paint atomization for professional results. The Model 200 NH will sprays inks, dyes, watercolors, gouaches, properly reduced acrylics, fabric paints, model paints, automotive lacquers and enamels, most ceramic stains and glazes, all of Badger airbrush ready paints. The simplicity of the Model 200 NH makes this the top choice for the advanced model painter or decorative stenciler. Also excellent air brush for painting posters, auto detailing and ceramics.
|Retail $114.00 SAVE 32% !|
2,211 Rewards Points
Buy - Earn - Save
You Might Also Like
- Color cup and one-piece jar adaptor taper-fit for quick color change.
- Self lubricating needle bearing enables continuous proper
- paint flow and prevents needle wear. Single needle / Tip design
- Head seal assures efficient air flow.
- Non-slip, one-piece trigger.
- Regulate the pre-set amount of color by turning a needle adjustment
- screw at the back of the air brush handle. Once the desired paint flow is set the air brush will maintain the preset spray until the user chooses to change it.
- The 200 NH will spray a pencil line to 2" spray pattern.
Compressor that produces at least 20 to 50 PSI.
- Badger Product Number: 200-3
200-3 Set contains 200 NH airbrush with general purpose nozzle / needle and attachable jar, protective cap, vinyl air hose, Propel' regulator, Propel' can, additional jar with cover, wrench for head, and instruction manual in a corrugated box.
Requirements & Suggestions
Air Source, Paint.
- Parts List:
- 50-001 Five Foot Air Hose
- 50-0011 Eight Foot Air Hose (includes 50-023)
- 50-2011 10 Ft. Air Hose (swivel connection both ends)
- 50-2025 Moisture Filter (with 10 Ft. 50-2011 Hose)
- 50-2014 Moisture Filter (only)
- 50-010 Needle Chuck
- 50-011 Handle
- 51-0107 Shell (w/Needle Bearing)
- 50-013 Valve Casing
- 50-014 Plunger & O Ring
- 50-0141 O Ring
- 50-015 Valve Screw
- 51-048 Needle
- 50-019 Trigger
- 50-020 Plunger Spring
- 50-021 Air-Brush Holder
- 51-073 Air-Brush Protective Cap
- 50-023 ¼ Pipe Thread Fitting
- 50-0241 Jar Cover Gasket (3 per package)
- 51-009 Siphon Tube
- 50-027 Needle Adjusting Screw
- 50-029 Tire Adaptor
- 41-043 Guarded Spray Regulator
- 51-071 Head
- 41-004 Tip
- 50-036 Valve Assembly (complete 50-013/014/0141/015/020)
- 50-046 Needle Bearing
- 50-0482 ¼ oz. Color Cup
- 50-0052 ¾ oz. Paint Jar w/Cover
- 50-0053 2 oz. Paint Jar w/Cover
- 50-111 Coupling Nut
- 50-112 Coupling Nipple
- 50-200 Propel Regulator Valve
- 50-208 Jar Adaptor
- 50-4011 10 Ft. Re-Coil Air Hose for Badger/Thayer Chandler
- 50-4012 10 Ft. Re-Coil Air Hose for Paasche/Binks
- 51-087 Trigger Pad