Hobbylinc

Shop online for 53 hobbylinc at discounts up to 32%.

Sub-Categories for Hobbylinc

Products of Hobbylinc

INSTA-CURE Gap Filling Cyanoacrylate 1oz

Hobby CA Super Glue
$6.99 $4.99
SALE
29% Off
Hobbylinc # hlc107
  Add To Cart
Wish List
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .

INSTA-SET Cyanoacrylate Accelator 2oz

Hobby CA Super Glue Accelerator
$6.99 $5.39
SALE
23% Off
Hobbylinc # hlc151
  Add To Cart
Wish List
INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.

Extra Cyanoacrylate Tops

CA Glue Tip Glue Applicator
$0.79 $0.69
Hobbylinc # hlc312
  Add To Cart
Wish List
Replacement top that is on all of BSI's non-Pocket CAs.

INSTA-CURE Gap Filling Cyanoacrylate 2oz

Hobby CA Super Glue
$11.99 $9.19
SALE
23% Off
Hobbylinc # hlc108
  Add To Cart
Wish List
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .

Deluxe Hobby Kit

Miscellaneous Hand Tool Assortment
$39.99 $30.59
SALE
24% Off
Hobbylinc # hlckit-03
  Add To Cart
Wish List
Supplies that picture-perfect model. The best of everything for building the highest quality models. Great gift for the experienced modeller.

MAXI-CURE Extra Thick Cyanoacrylate 1/2oz

Hobby CA Super Glue
$4.79 $3.69
SALE
23% Off
Hobbylinc # hlc111
  Add To Cart
Wish List
MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. . Learn about how to Select a Super Glue.
Website security verified by GoDaddy

MAXI-CURE Extra Thick Cyanoacrylate 2oz

Hobby CA Super Glue
$11.99 $9.19
SALE
23% Off
Hobbylinc # hlc113
  Add To Cart
Wish List
MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. It also is best for bonding the tires for R/C cars.

INSTA-CURE Super Thin Cyanoacrylate 2oz

Hobby CA Super Glue
$11.99 $9.19
SALE
23% Off
Hobbylinc # hlc103
  Add To Cart
Wish List
INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. .

Extra Fine Extender Tips (6)

Glue Tip Glue Applicator
$2.99 $2.39
Hobbylinc # hlc302
  Add To Cart
Wish List
For use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time.

MAXI-CURE Extra Thick Cyanoacrylate 1oz

Hobby CA Super Glue
$6.99 $4.99
SALE
29% Off
Hobbylinc # hlc112
  Add To Cart
Wish List
MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. It also is best for bonding the tires for R/C cars.

SLOW CURE 30 Minute Epoxy (9oz)

Hobby Epoxy
$22.99 $17.69
SALE
23% Off
Hobbylinc # hlc206
  Add To Cart
Wish List
SLOW-CURE 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE can be used for bonding if you're willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE and FINISH-CURE to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.

INSTA-SET Refill Cyanoacrylate 8oz

Hobby CA Super Glue Accelerator
$13.99 $10.69
SALE
24% Off
Hobbylinc # hlc152
  Add To Cart
Wish List
INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.

INSTA-CURE Super Thin Cyanoacrylate 1oz

Hobby CA Super Glue
$6.99 $5.39
SALE
23% Off
Hobbylinc # hlc102
  Add To Cart
Wish List
INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

Insta-Set 3.75 fl oz Aerosol Accelerator F.S.

Hobby CA Super Glue
$13.99 $10.69
SALE
24% Off
Hobbylinc # hlc155
  Add To Cart
Wish List
INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.

INSTA-CURE Super Thin Cyanoacrylate 1/2oz

Hobby CA Super Glue
$4.79 $3.69
SALE
23% Off
Hobbylinc # hlc101
  Add To Cart
Wish List
INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. .

INSTA-CURE Gap Filling Cyanoacrylate 1/2oz

Hobby CA Super Glue
$4.79 $3.69
SALE
23% Off
Hobbylinc # hlc106
  Add To Cart
Wish List
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

IC-Gel Ethyl Cyanoacrylate Gel .7oz

Hobby CA Super Glue
$7.99 $6.19
SALE
23% Off
Hobbylinc # hlc116
  Add To Cart
Wish List
IC-GEL is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET allows IC-GEL to be sanded or filed to final shape in less than 20 seconds.

UN-CURE Cyanoacrylate Debonder 1oz

Hobby CA Super Glue Debonder
$4.99 $3.89
SALE
22% Off
Hobbylinc # hlc161
  Add To Cart
Wish List
UN-CURE debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water.

IC-2000 Black Rubber Toughened CA (1 oz.)

Hobby CA Super Glue
$11.99 $9.19
SALE
23% Off
Hobbylinc # hlc118
  Add To Cart
Wish List
IC-2000 is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials.

Basic Hobby Kit

Miscellaneous Hand Tool Assortment
$14.99 $10.19
SALE
32% Off
Hobbylinc # hlckit-01
  Add To Cart
Wish List
All the supplies needed for basic model building. Great addition to any model purchase.