Latex Painting Mask

MasterMask is Ideal for Creating Attractive and Unique Trim Schemes Without Masking Tape. Designed for use on R/C Cars, Boats and Planes as Well as Model Trains and Plastic Models.

Hobbico Latex Painting Mask Master Mask 3oz #r3410
 Hobbico # hcahcar3410
$5.69
DISCONTINUED
 
Retail $7.99  SAVE 29% !
Hobbico Item # hcahcar3410
Features :
  • Latex-Based Masking Film for Masking Letters, Lines, Curves, etc. or Any Finish or Surface
  • Can be Brushed or Sprayed On and Will Dry to a Rubbery Consistency that is Much Easier To Use and More Precise Than Masking Tape.
  • Thick Consistency Requires Only One Coat Coverage for Less Waste.
  • Leaves Sharp, Clean Lines and is Non-Toxic and Non-Flammable.
  • Comes in a Convenient 2 oz Bottle with a Wide Mouth for Easy Access.
Out of Stock
Discontinued - No longer available for purchase
Website security verified by GoDaddy.

Spotlight Review

 
"eh not a fan"
justinbishop1987 (Muskegn Mi)
iv used it a few times but never got a good out come id take the time to use tape but if that is not a option then its worth a shop

You Might Also Like

← Swipe To View More →

Features

  • Latex-Based Masking Film for Masking Letters, Lines, Curves, etc. or Any Finish or Surface
  • Can be Brushed or Sprayed On and Will Dry to a Rubbery Consistency that is Much Easier To Use and More Precise Than Masking Tape.
  • Thick Consistency Requires Only One Coat Coverage for Less Waste.
  • Leaves Sharp, Clean Lines and is Non-Toxic and Non-Flammable.
  • Comes in a Convenient 2 oz Bottle with a Wide Mouth for Easy Access.

Specs

  • Hobbico Product Number: HCAR3410

Includes

One 3 oz Bottle


Requirements & Suggestions

← Swipe To View More →

Reviews

  
 
"Doesn't really stick well"
Shane S. (Dallas, Tx)
I had problems to the point where this stuff was unusable. I applied some in varying thicknesses and let it dry for 2 hours as directed. Then when I went to trim it off with a very sharp x-acto it just peeled the masking film back as though it wasn't adhering to the surface. It dries fairly transparent so it's hard to see even if you apply it fairly thick. I'm fairly displeased with it. Going to try a few more brands before going back to good ol Tamiya masking tape.

 
"Great for masking scale model windows"
ajwargo
As opposed to other liquid mask products, Master Mask is very thick and excellent for painting on with a fine brush or even dabbing with a tooth pick. It's great for masking small features, such as windows, when masking tape would be too difficult to apply. I've found that with a good two to three coats over scale windows, I can prime and paint a model completely, then come back and remove the latex mask. It removes pretty easily, by either rubbing with a finger, or some scrapping with a soft, pliant tool, even a tooth pick.

Comments

  • When used with butyrate canopies, the combination of Master Mask and lacquer-based paints (LustreKote, Chevron, etc), the paint may attack the MasterMask and etch through to the surface of the canopy causing damage to the canopy. MasterMask alone alone will NOT attack butyrate, and it will NOT react with enamel- or acrylic-based paints (example: paint butyrate canopies with enamel or acrylic paints when using MasterMask).
  • Thin with water.

Others Also Ordererd

← Swipe To View More →