Tiger I Ausf.E

The assembly starts with a fully detailed turret interior, but there is no hull interior. This detail is quite extensive and takes up the first five steps. Not much is visual thought the hatches, but I have seen where you can leave the top of the turret unglued and take it off to display. You also have to decide at this time what version to build, with the hatches closed or open. This only affects construction a few times, mainly when installing the hatches and their interior details. The only real fit problem I encountered was with part C54, the inter-hull bracing between the drivers compartment and the hull under the turret. This prevents the upper hull top from mounting flush with the sides of the hull. I had to break it back out and just trash it. It is not seen and was not needed to brace the upper hull. Another part that I left off was part B19, a ring that locked the turret to the hull, since I like to paint the hull and turret separately. The turret will still fit on the hull, but is a little loose, really no big deal. The barrel comes in two pieces, something I truly dislike. I did get an RB Models replacement metal barrel for a Tamiya Tiger and this fit great without any kit modification. This kit is missing engine screens, so I got the Tamiya screens and those fit great, also. The four hull-mounted smoke dischargers need to be drilled out, as do the machine guns. Another choice of versions comes up when deciding to mount extra track links on the side of the turret and the smoke dischargers. The two paint schemes are a solid desert yellow without these and a camoflage of yellow and red-brown with them. This also affects which decals to use, the black numbers for the solid and the white numbers for the camouflage. I decided to add them, camouflage the Tiger with yellow and red-brown, and use the white decals. The vinyl tracks are much like Tamiyas older ones; they are nicely detailed but did not hold paint very well. I used an acrylic primer and I think I needed to use a lacquer-based primer to get a good bite into this vinyl. The decals were a little out of register and did not have very sharp, defined edges. They lay down fine on the model with just a little setting solution. There are two options on the decals to go with the two options on the paint layout.