Pin Vise 1/16 Collet w/6 Bits

This is a PIN VISE (Pocket Drill) w/1/16" Collet and Six Bits that conveniently are stored in the knurled handle with shirt pocket clip.

Hobbico Pin Vise 1/16  Collet w/6 Bits
 Hobbico # hcahcar0696
Retail $11.99  SAVE 29% !
Hobbico Item # hcahcar0696
Out of Stock
Discontinued - No longer available for purchase
Website security verified by GoDaddy.

Spotlight Review

"Great Tool to Have"
drwho31 (St. Louis, MO)
I got this Tool last year. It works great in making and enlarging holes. Easy to control the depth of making holes, so you don't accidently go through the other side of the part. I used it to enlarge a hole for a mating part, it didn't take much to do the job. A few turns and it's done. Using other tools would have ruined the part by going through it. I highly recommended it.

You Might Also Like

← Swipe To View More →


  • Hobbico Product Number: HCAR0696


  • One Pin Vise (pocket drill) w/pocket clip.
  • One #52 pin vise drill bit.(nearly 1/16")
  • One #56 pin vise drill bit.
  • One #60 pin vise drill bit.
  • One #64 pin vise drill bit.
  • One #70 pin vise drill bit.
  • One #80 pin vise drill bit.

Requirements & Suggestions

← Swipe To View More →


"Good Pin Vise"
isaackeller90 (Somerset, MA)
Good starter pin vise bits included are #52, #56, #60, #64, #70, #80. Fits drill bit sizes 52-80. A little tougher to hold then some shorter ones out there but it will get you started on general all your 1/35 plastic modeling needs. I just have a major complaint with the chuck device as it can get stuck up, needs some breaking in as the metal on it was so fresh and it should be smoother then but I believe that's my worst thing to say about this one.

"good value"
justinbishop1987 (Muskegn Mi)
for the money its a good hand drill. i have many different type of these and this one not having a knob or some sort of turn style top it isnt my go to drill. but being that the bits are self contained thats a plus. the bits work great for wood or plastic. i would recommend this based on the price alone

"Nice Starter Set"
I admit, I bought this because it was one of the cheapest sets and I had to stay within my Female Spousal Approved Budget. However, I was not disappointed in the set. I was using the point of my x-acto blade to make holes, but this is much better. If nothing else it will save me from breaking the tips of my blades. I wish I would have found this site and this pin vise before I did the windows on my old AMT Enterprise kit. I am using it now to rig out Revell's 1/72 Fokker EIII and I would not have been able to do that with just a hobby knife.

Others Also Ordererd

← Swipe To View More →