Spray Flat Red 3 oz

This is a 3 oz. (85 g) can of Flat Red Enamel Spray Paint.

Testors Spray Flat Red 3 oz Hobby and Model Enamel Paint #1250
 Testors # tes1250
Retail $8.99  SAVE 21% !
Testors Item # tes1250
Specifications :
  • Testors Product Number: 1250
USA Ground Shipping Only
Website security verified by GoDaddy.

Spotlight Review

"Testors Spray Flat Red - Enamel"
Great product! Goes on smooth. Tip: Put the spray can in pot of luke warm water for 3-5 minutes each time before using (and in between coats) - and remember to shack well before each use. Also this is enamel paint - so make extra sure you are in a well ventilated place, let is dry for a few hours before handling (overnight is better) and then at least a day to fully cure.

Member Gallery

(Pictures shared by our community)
User image #18763User image #39193User image #23931User image #25573
← Swipe To View More →

You Might Also Like

← Swipe To View More →


  • Made of enamel and is flammable and toxic.
  • Can be used for
  • models, ceramic, plastics, leather, stone, metal, styrofoam,
  • crafts, wax, glass, paper, figures, fabric, wood and touching
  • up purposes.
  • Not suitable for polyethylene or vinyl.
  • Contains no lead or harmful CFC'S.
  • Easy-to-hold can.
  • Does not exceed 80% VOC by weight.


  • Testors Product Number: 1250


One 3 oz. (85 g) Can of Flat Red Enamel Spray Paint.

Requirements & Suggestions

Eye, Lung and Skin protection.

← Swipe To View More →


"Great coverage"
readyrog48 (Potsdam, NY)
Great coverage and very user friendly paint - Highly recommend !

"Used to Enhance The Model"
No problems with spraying. Good to warm the can either in the sun or warm water so it will lay out nicely. Shake well. Used this for undercarriage on one of my models.

"Layout /Building supplies"
I have not developed proper brush techniques yet and spray paint works best for me!


  • Keep out of reach of children.
  • Highly Flammable Paint, avoid heat, flame or puncturing can.
  • Avoid eye contact, skin contact or prolonged breathing of vapors, best to use in a well-ventilated area.
  • Inhaling contents is harmful to respiratory tract and nervous system.
  • Product has chemical known to cause birth defects and other reproductive harm in the state of California.
  • Shake can vigorously before using, reshake often and use at room temperature.
  • For best desired results, test product first.
  • Spray with even strokes and do not stop painting in the middle, for the best results.
  • To avoid wrinkling, recoat within 3 hours or after 48 hours.
  • To clear valve after use, invert can and spray several seconds, if nozzle clogs, clean with thinner.

Others Also Ordererd

← Swipe To View More →