Spray High Gloss Clear 3 oz

This is a 3 oz (85 g) can of High Gloss Overcoat Enamel Spray Paint.

Testors Spray High Gloss Clear 3 oz Hobby and Model Enamel Paint #1814
 (17)
 Testors # tes1814
$9.29
 
Retail $11.40  SAVE 19% !
Testors Item # tes1814
Features :
  • Made of enamel and is flammable and toxic.
  • Can be used for
  • models, ceramic, plastics, leather, stone, metal, styrofoam,
  • crafts, wax, glass, paper, figures, fabric, wood and touching
  • up purposes.
  • Not suitable for polyethylene or vinyl.
  • Contains no lead or harmful CFC'S.
  • Easy-to-hold can.
  • Does not exceed 95% VOC by weight.
  IN STOCK
USA Ground Shipping Only
Website security verified by GoDaddy.

Spotlight Review

 
"Want the real wet look to your model cars and trucks paint finish???"
ss542006
This is a great Clear Coat...but rather than go thru all the different sheets of polishing to get that wet look buy a bottle of McGuire's #3 Machine Glaze,using just a drop or two and a Kleenex folded 4 times,repeat 2 possibly 3 times,once you have that almost mirror look polish with a clean Kleenex and then do the same process with McGuire's #7 Show Car Glaze Glaze... You'll have a finish that everyone will envy!!!

Member Gallery

(Pictures shared by our community)
  
User image #65883User image #38073User image #65897User image #38075
← Swipe To View More →

You Might Also Like

← Swipe To View More →

Features

  • Made of enamel and is flammable and toxic.
  • Can be used for
  • models, ceramic, plastics, leather, stone, metal, styrofoam,
  • crafts, wax, glass, paper, figures, fabric, wood and touching
  • up purposes.
  • Not suitable for polyethylene or vinyl.
  • Contains no lead or harmful CFC'S.
  • Easy-to-hold can.
  • Does not exceed 95% VOC by weight.

Specs

  • Testors Product Number: 1814

Includes

One 3 oz (85 g) Can of High Gloss Overcoat Enamel Spray Paint.


Requirements & Suggestions

Eye, Lung and Skin protection.

← Swipe To View More →


Reviews

  
 
"glass like finish"
Felgenhauer98
this is a great clear coat. Give your model a glass like finish with this clear. Easy to spot where its been applied to. It is easy to apply.

 
"A Good Final Finish"
edrn007
I like to warm up the can by putting it in the sun light or in warm water so it sprays up nicer. Give a couple of days to cure. I usually put on 2 coats and let it tack up in between coats.

 
"High Gloss over Camo"
qualifyin (SoCal)
I tried this on a WW2 aircraft recently. It sealed-in two camo colors on the plane. The gloss finish looked kinda cool. I decaled it and reapplied the High Gloss Clear. It does catch the eye. It's going to stay like that--it's finished.

Comments

  • Keep out of reach of children.
  • Highly Flammable Paint, avoid heat, flame or puncturing can.
  • Avoid eye contact, skin contact or prolonged breathing of vapors, best to use in a well-ventilated area.
  • Inhaling contents is harmful to respiratory tract and nervous system.
  • Product has chemical known to cause birth defects and other reproductive harm in the state of California.
  • Shake can vigorously before using, reshake often and use at room temperature.
  • For best desired results, test product first.
  • Spray with even strokes and do not stop painting in the middle, for the best results.
  • To avoid wrinkling, recoat within 3 hours or after 48 hours.
  • To clear valve after use, invert can and spray several seconds, if nozzle clogs, clean with thinner.

Others Also Ordererd

← Swipe To View More →