Spray Flat Black 3 oz

This is a 3 oz. (85 g) can of Flat Black Enamel Spray Paint.

Testors Spray Flat Black 3 oz Hobby and Model Enamel Paint #1249
 Testors # tes1249
Retail $8.99  SAVE 21% !
Testors Item # tes1249
Specifications :
  • Testors Product Number: 1249
USA Ground Shipping Only
Website security verified by GoDaddy.

Spotlight Review

"works well"
Very good coverage spray with good coverage haven't had any clogs

Member Gallery

(Pictures shared by our community)
User image #65731User image #15035User image #38319User image #14735User image #38321
← Swipe To View More →

You Might Also Like

← Swipe To View More →


  • Made of enamel and is flammable and toxic.
  • Can be used for
  • models, ceramic, plastics, leather, stone, metal, styrofoam,
  • crafts, wax, glass, paper, figures, fabric, wood and touching
  • up purposes.
  • Not suitable for polyethylene or vinyl.
  • Contains no lead or harmful CFC'S.
  • Easy-to-hold can.
  • Does not exceed 95% VOC by weight.


  • Testors Product Number: 1249


One 3 oz. (85 g) Can of Flat Black Enamel Spray Paint.

Requirements & Suggestions

Eye, Lung and Skin protection.

← Swipe To View More →


"For The fine Details"
To help it to spray out better and even set in sun light or warm water for little while before spraying. One coat works pretty good.

Matthew M. (Orofino Id)
I like using these Testors flat black spray paints for painting the whole model a solid color as a primer before you airbrush the model . It works perfect for that . For best results spray a short burst all over the areas you want painted . Don't spray out too much that is what causes paint drip or run off so short paint bursts and you shouldn't run into any problems . Fast drying is a plus . I will keep using Testors sprays for a primer excellent choice for the scale modelers out there .

"Flat Black. Spray Paint"
This isa very good. Product. Goes on easy no runs. Dries great and fast with a very nice finish and looks very real


  • Keep out of reach of children.
  • Highly Flammable Paint, avoid heat, flame or puncturing can.
  • Avoid eye contact, skin contact or prolonged breathing of vapors, best to use in a well-ventilated area.
  • Inhaling contents is harmful to respiratory tract and nervous system.
  • Product has chemical known to cause birth defects and other reproductive harm in the state of California.
  • Shake can vigorously before using, reshake often and use at room temperature.
  • For best desired results, test product first.
  • Spray with even strokes and do not stop painting in the middle, for the best results.
  • To avoid wrinkling, recoat within 3 hours or after 48 hours.
  • To clear valve after use, invert can and spray several seconds, if nozzle clogs, clean with thinner.

Others Also Ordererd

← Swipe To View More →