|
|
Plastic Models → Plastic Model Airplanes → 1/20-1/29 Scale
|
Revell of Germany 1/20 Boeing 737-200
|
| $8.94 $6.49 (27% off) |
Product Number rvl04232 |
Availability In Stock |
The Boeing 737 was designed as a short range passenger airliner to compete against the British BAC 1-11 and the Douglas DC-9. Featuring a twin engine arrangement with one turbojet mounted under each wing, the 737 also borrowed many components fromthe earlier 727 which has 3 tail mounted engines. To date, more 737's have been produced than any other passenger airliner and with engine and airframe upgrades, the type is likely to remain in service for many years. 1/200th
.....
...more about the Revell of Germany 1/20 Boeing 737-200
|
Revell of Germany 1/28 Spad XIII WW1 Fighter
|
| $22.25 $16.09 (27% off) |
Product Number rvl04730 |
Availability In Stock |
Light gray polystyrene parts accurately molded with realistic surface details. Beautifully detailed V8 engine with rotating propeller. Detailed cockpit with seat, pedals, and control stick. Movable landing gear wheels. Thread included for stay wires. Realistically molded Vickers MGs. Pilot and and 2 ground crew figures. Waterslide decals. Illustrated assembly guide. (1) Plastic Model. This is a WWI SPAD XIII Plastic Model Kit from Revell. Suitable for Ages 10 & Older. One
.....
...more about the Revell of Germany 1/28 Spad XIII WW1 Fighter
|
Revell of Germany 1/28 Fokker Dr. I Richhof
|
| $22.25 $16.09 (27% off) |
Product Number rvl04744 |
Availability In Stock |
Manfred von Richthofen (A.K.A. ''The Red Baron'') made history in the Great War with his red Fokker triplane. Introduced in June 1917, it was the most maneuverable aircraft and achieved high climbing speeds. Skill level 3 includes up to 100 red plastic pieces molded to sprue trees. Detailed radial engine. Movable propeller. Detailed cockpit with control column, seat and pedals. Structurally detailed wings. Two Spandau MGs. Landing gear with movable wheels. Pilot figure von
.....
...more about the Revell of Germany 1/28 Fokker Dr. I Richhof
|
Trumpeter 1/24 P51D Mustang IV Fighter
|
| $144.94 $104.79 (27% off) |
Product Number tsm02401 |
Availability In Stock |
Great Gift Idea
Accurately reproduced exterior and cockpit. Photo etched flap hinges. Metal shafts and springs. Clear cockpit canopy and control panel face. Detailed landing gear with treaded vinyl tires. Detailed machine gun assemblies, tanks, and bombs. Three resin pilot figures. Highly detailed engine. Illustrated assembly guide. One Plastic Model. Assemble the North American P-51D Mustang IV with this 1;24 Scale Plastic Model Kit from Trumpeter Scale Models. Suitable for Ages 14 &
.....
...more about the Trumpeter 1/24 P51D Mustang IV Fighter
|
Trumpeter 1/24 Focke Wulf Fw190 D-9
|
| $139.94 $101.09 (27% off) |
Product Number tsm02411 |
Availability In Stock |
Accurately reproduced exterior and cockpit. Photo-etched hinges. Metal shafts. Complete cockpit detail including instrument panel film. Canopy may be modeled as the early or later version. Exquisitely detailed engine. Machine guns mounted within the wings and nose. Highly detailed landing gear and bays. High-quality decals printed by Cartograph. Illustrated assembly guide. One Plastic Model. Assemble A Focke-wulf Fw190 D-9 with this 1;24 Scale Plastic Model Kit from
.....
...more about the Trumpeter 1/24 Focke Wulf Fw190 D-9
|
Trumpeter 1/24 Hawker Hurricane Mk I British Fighter
|
| $159.94 $115.59 (27% off) |
Product Number tsm02414 |
Availability In Stock |
Top-quality, injection molded plastic parts with amazing details and accuracy. Beautifully reproduced gun bays complete with guns, ammo ammo chutes, etc. The Merlin engine and support systems are rendered with exquisite detail, and can be viewed thru the clear side cowling panels. Movable propeller. Beautifully reproduced cockpit! The control panel is brought to life with printed film. Photo etched Sutton harness. Photo etched side control panels. The ailerons, flaps, and
.....
...more about the Trumpeter 1/24 Hawker Hurricane Mk I British Fighter
|
Trumpeter 1/24 Hurricane Mk.IIC Fighter
|
| $159.94 $115.59 (27% off) |
Product Number tsm02415 |
Availability In Stock |
Top-quality, injection molded plastic parts with amazing details and accuracy Beautifully reproduced gun bays complete with guns, ammo ammo chutes, etc Movable propeller Detailed cockpit Photo etched pieces The clear canopy Waterslide decals with authentic aircraft roundels and markings Illustrated assembly guide. One Plastic Model. This is a ''Hurricane'' Mk.IIC Plastic Model Kit by Trumpeter. Suitable for Ages 14 & Older. One Decal Sheet with Markings for 2 Hurricane
.....
...more about the Trumpeter 1/24 Hurricane Mk.IIC Fighter
|
Trumpeter 1/24 Hwkr Huricane Mk IIC/Trop Fghtr
|
| $159.94 $115.59 (27% off) |
Product Number tsm02416 |
Availability In Stock |
Top-quality, injection molded plastic parts with amazing details and accuracy. Beautifully reproduced gun bays complete with guns, ammo ammo chutes, etc. The Merlin engine and support systems are rendered with exquisite detail, and can be viewed thru the (optional) clear side cowling panels. Tropical air filter intake. Movable propeller. Beautifully reproduced cockpit! The control panel is brought to life with printed film. Photo etched Sutton harness. Photo etched side
.....
...more about the Trumpeter 1/24 Hwkr Huricane Mk IIC/Trop Fghtr
|
Trumpeter 1/24 Hawker Hurricane IID Trop Fighter
|
| $159.94 $115.59 (27% off) |
Product Number tsm02417 |
Availability In Stock |
Top-quality, injection molded plastic parts with amazing details and accuracy Beautifully reproduced gun bays complete with guns Movable propeller Detailed cockpit, landing gear and engine Photo etched pieces The clear canopy Rubber tires Waterslide decals with authentic aircraft roundels and markings Illustrated assembly guide. One plastic model. This is a ''Hurricane'' Mk.IID/Trop Plastic Model Kit by Trumpeter. Suitable for Ages 14 & Older. One decal sheet with markings
.....
...more about the Trumpeter 1/24 Hawker Hurricane IID Trop Fighter
|
Trumpeter 1/24 Messerschmitt Bf109K-4 German Fighter
|
| $139.94 $101.09 (27% off) |
Product Number tsm02418 |
Availability In Stock |
Top-quality, injection molded plastic parts with amazing details and accuracy. This kit comes with optional clear fuselage, cowl, oil cooler and horizontal stabilizer parts. Photo etched flight control hinges and metal shafts. Beautifully reproduced cockpit! The control panel is brought to life with printed film. Intricately detailed Daimler Benz DB 605 D engine with vinyl exhaust parts. Engine cowl can be fixed in the closed position or propped open with a metal shaft. The
.....
...more about the Trumpeter 1/24 Messerschmitt Bf109K-4 German Fighter
|
|
Plastic Models → Plastic Model Airplanes → 1/30-1/39 Scale
|
Academy Plastics 1/32 F-16CG/CJ Block 40/50
|
| $109.00 $78.79 (27% off) |
Product Number acy12101 |
Availability In Stock |
Injection molded plastic parts accurately reproduce the exterior with scribed surface details. Build either a highly detailed General Electric F110 or a Pratt and Whitney F100 engine. Exquisitely reproduced cockpit! A boarding ladder, two pilot figures, and one ground crew figure. Optional crystal clear or smoky clear canopy parts that may be modeled in open or closed position. Choice of HUD units. 2 different styles of ''bird cutter'' 4-vaned IFF units. Optional long
.....
...more about the Academy Plastics 1/32 F-16CG/CJ Block 40/50
|
Academy Plastics 1/32 F/A-18D Hornet
|
| $159.00 $114.89 (27% off) |
Product Number acy12103 |
Availability In Stock |
Accurately reproduced static display model with scribed panel lines and rivet details. Various lights and lenses molded in clear styrene. 5 intricately detailed figures. Metal landing gear struts. Meticulously detailed main gear wells. Grooved rubber tires. Accurately reproduced cockpit including NACES ejection seats, instrument panels, side consoles, stick, throttle & rudder pedals. Optional single-seat or 2-seat clear canopy. The radome can be posed open or closed. In
.....
...more about the Academy Plastics 1/32 F/A-18D Hornet
|
Academy Plastics 1/32 F/A 18C Hornet Chippy Ho
|
| $169.00 $122.09 (27% off) |
Product Number acy12104 |
Availability In Stock |
Limited edition. High-quality plastic parts molded with realistically scribed panel lines and rivet details. Beautifully reproduced cockpit! The clear, split canopy can be posed either as opened or closed. 2 pilot and 2 ground crew figures molded with very realistic details! Die cast metal landing gear struts and solid synthetic, grooved rubber tires. Gear bays exquisitely detailed with all the plumbing! The radome can be posed open or closed. Highly detailed radar bay.
.....
...more about the Academy Plastics 1/32 F/A 18C Hornet Chippy Ho
|
Academy Plastics 1/35 UH-1C Huey Gunship Special Nose Art
|
| $39.00 $28.19 (27% off) |
Product Number acy12701 |
Availability In Stock |
The UH-1C is the third generation of Bell's Iroquois series.The UH-1C ''Huey'' saw its combat tour through to the close of the Vietnam War, deadly to the enemy and essential to US forces in its capacity as a most formidable gunship. Highly detailed cockpit, engine and transmission Miniguns, M60s and rocket pods Pilots and two crewmen figures Cartograf nose art decals for four Vietnam gunships Limited Edition. One 1/35 UH-1C ''Huey'' Frog Helicopter Model Kit. This is a 1/35
.....
...more about the Academy Plastics 1/35 UH-1C Huey Gunship Special Nose Art
|
Academy Plastics 1/32 Sopwith Camel F.1
|
| $18.00 $13.09 (27% off) |
Product Number acy2189 |
Availability In Stock |
The Camel was perhaps the best allied fighter of WW I. Its victory tally was 1,924 aircraft shot down in only sixteen months of fighting. The Camel was an Aces' mount which was extremely agile and had a fast rate of climb. In a controversial air battle in 1918, the great Baron Von Richthofen fell to the guns of a 209 Squadron RAF Camel flown by Canadian Roy Brown. Medium grey plastic pieces molded to sprue trees. Single seat cockpit. Recessed panel lines give authentic
.....
...more about the Academy Plastics 1/32 Sopwith Camel F.1
|
Academy Plastics 1/32 Nieuport
|
| $18.00 $13.09 (27% off) |
Product Number acy2190 |
Availability In Stock |
One of the most famous allied fighters of the First World War, fast, maneuverable Nieuport 17's were flown by some of France's most famous aces, including Georges Guynemer. This Nieuport 17 is a biplane. Machine gun mounted to the top of the upperwing. Single seat cockpit plane powered by one 2-blade propellor engine. Detailed cockpit interior and engine compartment. Detailed panel lines give an authentic appearance. Easy to follow pictorial assembly instructions.
.....
...more about the Academy Plastics 1/32 Nieuport
|
Academy Plastics 1/32 F/A-18C Hornet
|
| $159.00 $114.89 (27% off) |
Product Number acy2191 |
Availability In Stock |
Fully engraved panel lines and rivet details. Die cast metal landing gear struts. Accurately reproduced exterior and cockpit. Radome, airbrake, and open or closed canopy. Folding wings. Four detailed figures (2 pilots & 2 ground crew). Variousons; Sidewinders, Sparrows, 500lb bombs, FLIR, SLAM, Paveway II & III, JDAM, AMRAAM, Snakeyes, HARM, Mavericks, TINS. Solid synthetic rubber tires. Authentic markings including common data. Illustrated assembly guide. One Plastic
.....
...more about the Academy Plastics 1/32 F/A-18C Hornet
|
Bronco Models 1/35 WWII Piper Cub L4H Grasshopper Aircraft
|
| $62.98 $45.49 (27% off) |
Product Number bom35014 |
Availability In Stock |
A realistic depiction of a WWII Grasshopper Piper Cub. Highly detailed, injection molded Olive Drab plastic parts. Detailed cockpit with clear canopy. Detailed engine and landing gear. Authentic Cartograf waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble a US Piper Cub L-4 (O59) with this 1;35 Scale Plastic Model Kit from Bronco Models. Suitable for Ages 12 & Older. One Decal Sheet with Markings for 4 US Army Versions. 1) Piper Cub L-4A ''Operation
.....
...more about the Bronco Models 1/35 WWII Piper Cub L4H Grasshopper Aircraft
|
|
|
Czech Models 1/32 Brewester F2A-3 Model 339-23 Buffalo
|
| $59.95 $43.39 (27% off) |
Product Number czmcm3201 |
Availability In Stock |
Plastic pieces attached to sprues Detailed pictorial instructions guide you through assembly Limited Run Resin parts Detailed cockpit Photo-etched parts Detailed scale model for adult collectors. One plastic model kit. This is a 1/32 Scale Brewster F2A-3 Buffalo Model 339-23 US Navy & USMC Plastic Model Kit from Czech Model. For ages 14 to adult. Decal Options for 4 Versions. 1; BuNo 1553, VMF 221, Midway. 2; BuNo 1612, NAS Jacksonville. 3; A51-10/307, 25 Sqn. RAAF, Perth.
.....
...more about the Czech Models 1/32 Brewester F2A-3 Model 339-23 Buffalo
|
DML 1/32 P-51D Mustang 1st 1/32
|
| $50.95 $36.89 (27% off) |
Product Number dml3201 |
Availability In Stock |
Exquisitely reproduced model replica, engineered down to the smallest detail! Simulated laminar flow airfoil shape wings. Movable ailerons and rudder. Accuratley reproduced spent shell exit ports and camera port. Rotating propeller with movable blades. Prototypically reproduced propeller blades. Beautifully detailed clear engine cowling can be assembled in the open or closed position. Outstanding engine detail including radiator with etched metal parts. Superb cockpit
.....
...more about the DML 1/32 P-51D Mustang 1st 1/32
|
DML 1/32 F-6D Mustang
|
| $50.95 $36.89 (27% off) |
Product Number dml3202 |
Availability In Stock |
Delicate details produced by slide mold Fuselage camera ports w/ clear parts relistically portray F-6D Reconnaissance aircraft Rear air outlet can be positioned open or closed Camera hatch on the fuselage can be assembled open or closed Propeller blades are moveable, rotate and accurately curved cross-section and true-to-scale thickness Transparent engine cowling comes w/ fine detail Engine cowing cover can be assembled open or closed Pilot's seat is upgraded w/
.....
...more about the DML 1/32 F-6D Mustang
|
DML 1/32 P-51D Mustang Early Production
|
|
Hobby Craft Canada 1/48 DHC Otter w/Skis & Wheels
|
| $35.00 $25.29 (27% off) |
Product Number hcchc1657 |
Availability In Stock |
Detailed 1/48 scale model for static display. Parts molded in gray, plus clear pieces. Engraved panel lines on body. Plane may be built with wheels or floats for landing gear. Authentic cockpit area. Three-bladed propeller on the nose. Several windows on each side of plane. Waterslide decals. Pictorial instructions. One 1/48 DHC Otter Wheels/Floats Aircraft Kit. This is a Plastic 1/48 DHC Otter Wheels/Floats Aircraft from Hobby Craft. It's for experienced modelers ages 10
.....
...more about the Hobby Craft Canada 1/48 DHC Otter w/Skis & Wheels
|
Hobby Craft Canada 1/48 Avro Arrow
|
| $53.00 $38.29 (27% off) |
Product Number hcchc1659 |
Availability In Stock |
Medium grey plastic pieces molded to sprue trees. Clear pieces for canopy included. Dual seat cockpit. Recessed panel lines give authentic look. Detailed cockpit and landing gear. Realistic afterburner. Waterslide decals. Detailed pictorial instructions. One 1/48 Scale CF-105 ''Arrow'' Plastic Model Kit. This is a 1/48 Scale CF-105 ''Arrow'' Plastic Model Kit by Hobby Craft. For Experienced Modelers. One decal sheet with markings for five aircraft. Canadian RL201-RL205.
.....
...more about the Hobby Craft Canada 1/48 Avro Arrow
|
Hobby Craft Canada 1/32 SPAD XIII Aces
|
| $26.00 $18.79 (27% off) |
Product Number hcchc1687 |
Availability In Stock |
Medium Grey plastic pieces molded to sprue trees. Detailed cockpit. Detailed landing gear. Engraved panel lines give authentic look. Authentic markings. Detailed pictorial instructions. One 1/32 Scale SPAD XIII ''Aces'' Plastic Model Kit. This is a 1/32 Scale SPAD XIII ''Aces'' Plastic Model Kit from Hobbycraft. One decal sheet with markings for two aircraft. 1; Capt. Eddie Rickenbacker, 95 Sqn., USA, 1918. 2; Lt. Charles Nungesser, SPA 65, France, 1918. Aircraft Colors.
.....
...more about the Hobby Craft Canada 1/32 SPAD XIII Aces
|
Hobby Craft Canada 1/32 SPAD XIII International
|
| $26.00 $18.79 (27% off) |
Product Number hcchc1688 |
Availability In Stock |
Medium Grey plastic pieces molded to sprue trees. Detailed cockpit. Detailed landing gear. Engraved panel lines give authentic look. Authentic markings. Detailed pictorial instructions. One 1/32 Scale SPAD XIII ''International'' Plastic Model Kit.This is a 1/32 Scale SPAD XIII ''International'' Plastic Model Kit from Hobbycraft. One decal sheet with markings for two aircraft. 1; Capt. Georges Guynemer, SPA3, France, 1917. 2; Mag. Francesco Barraca, Italy, 1918. Aircraft
.....
...more about the Hobby Craft Canada 1/32 SPAD XIII International
|
Medium grey plastic pieces molded to sprue trees. Clear pieces for canopy included. Detailed cockpit with instrument panel, seat, control stick and more. Recessed panel lines give authentic look. Detailed engine. Realistic landing gear. Two drop tanks. Folding wings and moveable canopy. Detailed pictorial instructions. One 1/32 F4F-4 ''Wildcat'' Plastic Model Kit. This is a 1/32 F4F-4 ''Wildcat'' Plastic Model Kit by Hobby Craft. For Very Experienced Modelers. One decal
.....
...more about the Hobby Craft Canada 1/32 Wildcat
|
Hobby Craft Canada 1/32 Sopwith Camel RFC Le Rhone
|
| $26.00 $18.79 (27% off) |
Product Number hcchc1693 |
Availability In Stock |
Precisely molded light gray plastic parts with raised and engraved panel line details. Detailed cockpit, landing gear and engine. Authentic waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the Royal Flying Corps Camel ''Le Rhone'' with this 1;32 Scale Plastic Model Kit from Hobby Craft. Modeling Designed for the Master Modeler. One Decal Sheet with Markings for 2 RFC Versions. - Sopwith Camels of WWI; serial No.D9443 serial No.F2137. Airframe and
.....
...more about the Hobby Craft Canada 1/32 Sopwith Camel RFC Le Rhone
|
|