Model Master Aluminum No Buff Metallic 1/2 oz

This is a 1/2 oz (15ml) jar of Aluminum (Non-Buffing Metalizer) Metalizer Lacquer For Airbrush Only.

Testors Model Master Aluminum No Buff Metallic 1/2 oz Hobby and Model Lacquer Paint #1418
 Testors # tes1418
Retail $4.74  SAVE 16% !
Testors Item # tes1418
Specifications :
  • Testors Product Number: 1418
Out of Stock
Discontinued - No longer available for purchase
Website security verified by GoDaddy.

Spotlight Review

"I like it"
polockman (Lagro, IN)
This was my 1st time using a metalizer type paint - and it went great. Sprayed it on right out of the bottle (without priming). It covered the subject smoothly and quickly. I let it dry in my heated paint drying booth for two days and then handled it with latex gloves and none of the finished rubbed off onto my hands. I also brushed this on a few spots for some minute joint imperfection repairs and it brushes on great too - just keep the brush wet and don't spread it too thin.

Member Gallery

(Pictures shared by our community)
User image #19925
← Swipe To View More →

You Might Also Like

← Swipe To View More →


  • Metalizer is a unique metalizing "plate" finish, especially formulated for plastic models.
  • Metalizer system consists of a wide range of buffing and non-buffing 1/2 oz colors which will allow the modeler to duplicate virtually
  • any natural metal finish.
  • Jar can be attached and used with most airbrush systems.


  • Testors Product Number: 1418


  • One 1/2 oz (15ml) jar of Aluminum (Non-Buffing Metalizer)
  • Metalizer Lacquer

Requirements & Suggestions

  • Eye, Lung and Skin protection.
  • Testors #1409 Metalizer Sealer to go over paint and decaling.
  • Testors #1419 Metalizer Thinner to clean airbrush.
← Swipe To View More →




  • Keep out of reach of children.
  • Contains Butyl Acetate.
  • Highly Flammable Paint, avoid heat, sparks or open flame.
  • Avoid eye contact, skin contact or prolonged breathing of vapors, best to use in a well-ventilated area.
  • Warning: This product contains a chemical known to The State of California to cause birth defects or other reproductive harm.
  • Inhaling contents is harmful to respiratory tract and nervous system.
  • To use. Stir well. Airbrush light mist coats. Drys to touch in 30 minutes. Decal as usual. Seal with #1409 Sealer. Clean
  • airbrush with #1419 Thinner.
  • For Buffing, wait until after 10 minutes dry.
  • Recommended for ages 8 and over.

Others Also Ordererd

← Swipe To View More →