Spray Glosscote 3 oz

This is a 3 oz. (85 g) can of Clear Gloss Lacquer Overcoat Spray Paint.

Testors Spray Glosscote 3 oz Hobby and Model Lacquer Paint #1261
 (16)
 Testors # tes1261
$8.39
 
Retail $10.49  SAVE 20% !
Testors Item # tes1261
Features :
  • This is flammable and toxic.
  • Can be used for
  • models, ceramic, plastics, leather, stone, metal, styrofoam,
  • crafts, wax, glass, paper, figures, fabric, wood and touching
  • up purposes.
  • Not suitable for polyethylene or vinyl.
  • Contains no lead or harmful CFC'S.
  • Easy-to-hold can.
  • Does not exceed 95% VOC by weight.
  IN STOCK
USA Ground Shipping Only
Website security verified by GoDaddy.

Spotlight Review

 
"Shiny finish"
aj4grade (Palmer Lake, Colorado)
This glosscote helps decals stock, and it leaves a shiny finish.

You Might Also Like

← Swipe To View More →

Features

  • This is flammable and toxic.
  • Can be used for
  • models, ceramic, plastics, leather, stone, metal, styrofoam,
  • crafts, wax, glass, paper, figures, fabric, wood and touching
  • up purposes.
  • Not suitable for polyethylene or vinyl.
  • Contains no lead or harmful CFC'S.
  • Easy-to-hold can.
  • Does not exceed 95% VOC by weight.

Specs

  • Testors Product Number: 1261

Includes

One 3 oz. (85 g) Can of Clear Gloss Lacquer Overcoat


Requirements & Suggestions

Eye, Lung and Skin protection.

← Swipe To View More →


Reviews

  
 
"Excellent gloss finish"
nscrfns (Killeen, TX)
If used properly this will create a very nice gloss finish to a completed model or in preparation for decals. I've used this over lacquers, enamels and acrylics. One light coat followed by 1 or 2 medium coats. My best results are when I have decanted this and sprayed it through an airbrush without thinning further. The spray can nozzle puts out too much paint in my opinion. Don't get too close to your subject to help avoid pooling and/or runs. If sprayed over clear acrylics such as Model Masters or Alclad Aqua Gloss, several mist coats is best. Anything heavier than a mist will tend to attack the acrylic clear and result in a wrinkled finish. It doesn't do this with any colored acrylic paints. As always experiment on a test piece first.

 
"Testers clear goes on smooth"
jimandlisatolliver (Rocky Mount VA)
Great clear coat product perfect for a shiny finish.

 
"GREAT CLEAR FOR DECAL SHEETS BEFORE TAMIYA TS-13 CLEAR"
Segaman65 (walnut cove N.C)
THIS IS A GREAT CLEAR GLOSS LACQUER TO SPRAY OVER DECAL SHEETS, IF YOU ARE GOING TO USE TAMIYA TS-23 CLEAR COAT AS A FINAL CLEAR TOP COAT. TAMIYA IS A LITTLE HOTTER THAN THE TESTORS CLEAR AND ITS HAS WAY MORE SHINE TO IT. BUT TAMIYA CLEAR COULD EAT OR WRINKLE THE DECALS IF SPRAYED DIRECTLY ON THE DECALS, MAKE SURE TO USE LACQUER BASE COATS AS THE TAMIYA CLEAR WILL EAT & WRINKLE ENAMEL PAINT IN A HEART BEAT.

Comments

  • Keep out of reach of children.
  • Highly Flammable Paint, avoid heat, flame or puncturing can.
  • Avoid eye contact, skin contact or prolonged breathing of vapors, best to use in a well-ventilated area.
  • Inhaling contents is harmful to respiratory tract and nervous system.
  • Product has chemical known to cause birth defects and other reproductive harm in the state of California.
  • Shake can vigorously before using, reshake often and use at room temperature.
  • For best desired results, test product first.
  • Spray with even strokes and do not stop painting in the middle, for the best results.
  • To avoid wrinkling, recoat within 3 hours or after 48 hours.
  • To clear valve after use, invert can and spray several seconds, if nozzle clogs, clean with thinner.

Others Also Ordererd

← Swipe To View More →