Hobbylinc Home
Search:
Help Hobbylinc.com Home Page Shopping Cart
E18-4W Reload Kit 24/40 (3)
Other items from Aerotech

This Model Rocket Motor Reload Kit Includes Three E-class E18-4W Reloadable Motor Systems for RMS 24/40 Motor Hardware, Designed by Aerotech. Federal Law Prohibits the Sale of This Product to Persons Under Age 18.

Your Price:$15.19
Savings:33% off
List Price:$22.99
Product Number:aro51804
Usually ships out in 24 hours
Usually ships out in 24 hours
OR
Add to Wish List
Others Also Ordered
Features
  • For use in RMS 24mm D, E, F motor.
  • Primary use in single stage rockets.
  • They deliver power at the lowest per flight cost available in hobby rocketry.
  • White Lightning looks and sounds like actual sounding rockets and launch vehicles.
  • White Lightning propellant formulation: a brilliant white flame, dense bright white exhaust, and a throaty roar.
  • Easy to track and exciting to watch!
  • The average thrust of the motor is 4.1 pounds (18 Newtons).
  • Time delay of 4 seconds between propellant burnout and the firing of the ejection charge.
  • Uses the exclusive Copperhead single lead igniter.
  • Ignites by electrical means only.
  • Certified by the National Association of Rocketry.
  • This reload kit includes (3 of each)
  • -Liner (7/8" O.D. tube)
  • -Propellant Grain (long slotted part)
  • -Grain Adaptor (25/32" O.D. Tube)
  • -Delay Grain (short solid part)
  • -Delay Spacer (9/16" O.D. Washer, O-ring or tube)
  • -Delay Insulator (5/8" O.D. tube)
  • -Outer Delay O-Ring (1/16" thick x 5/8" O.D.)
  • -Inner Delay O-Ring (1/16" thick x 1/2" O.D.)
  • -Forward Insulator (7/8" O.D. Washer)
  • -Aft O-Ring (3/32" thick x 7/8" O.D.).
  • -Forward O-Ring (1/16" thick x 7/8" O.D.)
  • -Nozzle (black plastic part).
  • -Copperhead Igniter
  • -Ejection Charge Container/Nozzle Cap (Red)
  • Assembly and operation instructions provided.
  • Product warranty policies included.
Includes

3-Pak Package of E18-4W Reloadable Motor Systems

Specifications
  • Motor Diameter: 0.94" (24mm)
  • Assembled Weight: 2.0oz (57g)
  • Maximum Liftoff Weight: 16oz (454g)
  • Total Impulse: 40 Newtons
Requires
  • RMS 24/40 Motor(s)
  • 12V Launch System
  • Wet Wipes or Damp Paper Towel
  • Hobby Knife (tes50627c) or Scissors
  • Masking Tape
  • Assembly
Click a link to the left to view products here...
Comments
  • This reload kit is intended to be used only with AeroTech Reloadable System (RMS) hardware.
  • Read and follow the safety codes of the National Association of Rocketry (NAR) and the Tripoli Rocketry Association and comply with all federal, state and local laws in all activities with hobby rockets.
  • Damaged or defective reloads should be returned to Aerotech.
Home      |      Help      |      Order Status      |      Site Map
Copyright ©1995-2009 HobbyLinc. All rights reserved. Images and Descriptions are representative only, actual items may vary. Prices subject to change without notice.
index