F100D Super Sabre Attack Fighter

This is a F-100D Super Sabre Plastic Model Kit by Trumpeter. Suitable for Ages 14 & Older.

Trumpeter F100D Super Sabre Attack Fighter Plastic Model Airplane 1/32 Scale #02232
 Trumpeter # tsm02232
Retail $179.95  SAVE 21% !
Trumpeter Item # tsm02232
Specifications :
  • Scale: 1:32
  • Fuselage: 20-3/8" (516mm)
  • Wingspan: 14-1/2" (370mm)
  • Trumpeter Product Number: 02232
Website security verified by GoDaddy.

Spotlight Review

"First F100 Review"
somnus78 (Whidbey Island)
Another great Trumpeter model. There are a lot of decal options. Thunderbirds, polished aluminum early model paint schemes and the camouflage schemes. The sprues as usual are very thick and you need to use snips to remove pieces. The plastic is very strong and the pieces are thick and strong. There are options for the dual Sidewinder Inboard Pylons on Port and Stbd side or other ordnance. The back half comes off to reveal an extremely detailed engine.

Member Gallery

(Pictures shared by our community)
User image #27695User image #10525User image #27317User image #2131User image #32713User image #27697User image #10527User image #27319User image #32715User image #27699User image #10529User image #27321User image #32717User image #27701User image #10531User image #27323User image #32719User image #27703User image #10533User image #32721
← Swipe To View More →

You Might Also Like

← Swipe To View More →


  • High-quality plastic parts molded with an extreme level of detail and accuracy! Beautifully reproduced cockpit! Realistic ejection seat with photo etched brass shoulder harness and seatbelt.
  • Exquisitely detailed side consoles and a control panel brought to life with a film instrument panel backing plate.
  • An impressive representation of the turbojet engine! It has turbine blades reproduced with photo etched parts.
  • The tail of the aircraft can be posed separate from the fuselage on a highly detailed dolly trailer so that the engine may be exposed.
  • Separately molded leading edge slats, rudder, flaps and ailerons.
  • Photo etched wing fences.
  • Optional open or closed gun bays with vinyl ammunition belts.
  • Optional practice Bomb or the ALQ-31 Jammer.
  • Cast metal landing gear with vinly tires and brake lines.
  • 2 styles of refueling probes (straight and "S" curved), and nose pitot mast (straight or folded).
  • Air brakes may be fixed in the open or closed position.
  • Beautifully reproduced underwing stores.
  • Gear bays exquisitely detailed with all the plumbing! Display the canopy in the closed position, or open with boarding ladder.
  • Authentic waterslide decals.
  • Illustrated assembly guide.


  • Scale: 1:32
  • Fuselage: 20-3/8" (516mm)
  • Wingspan: 14-1/2" (370mm)
  • Trumpeter Product Number: 02232


One Plastic Model

Requirements & Suggestions

← Swipe To View More →


"Solid model"
terryr51 (Franklin, KY)
The model is well made and goes together with little fitting problems. I am using some after market decals for this aircraft.

"very impressed"
like any other kit, this had some problems here and there, mostly with fit. it was really hard to hide seams with the amount of surface detail trumpeter put in the kit. the intake is inaccurate, but the aftermarket has that covered. it is definitely a big plane that looked great when done in nmf. would recommend.

"A well detailed kit!"
This kit is worth the time and money! The detail is excellent and there were no problems in construction


  • Two Decal Sheets with Markings for 3 US Air Force Variations
  • 1: 511th FBS, 405th FBW, Based at Langley AFB, Virginia (May 1959)
  • 2: 309th FBS, 31st FBW, flown by Capt. Walt Bruce, Base at Tactical Air Command Gunnery (1958)
  • 3: 56-2927 "Thor's Hammer" of 309th TFS, 31st TFW, based at Tuy Hoa Airbase, South Vietnam
  • Aircraft & Detail Paint Colors: - Flat Black, Khaki, Red, Aircraft Gray, Silver, Metal Black, Burnt Iron, Interior Green, Orange Yellow, White Insignia, Tire Black, Gray, Brown, Forest Green, Light Green

Others Also Ordererd

← Swipe To View More →