Loc IV (38 mm motor mount)

The LOC IV is a four inch diameter, single 38 mm motor design. It boosts straight up under G motor power to altitudes reaching 1200 ft. Simple, straight forward construction and reliability rate this kit high in its class.

LOC Precision # locpk48

$68.39

DISCONTINUED

Retail $82.95 SAVE 18% !	LOC Precision Item # locpk48 Features : -Flights approaching altitudes up to 1200 feet. -Precision cut plywood components. -Plastic nose cone. -Parachute recovery. -36 heavy duty parachute. -This kit is recommended for those with previous model rocket building experience.
Out of Stock Discontinued - No longer available for purchase

Spotlight Review

"Great mid power rocket"

jef955

This is a great mid power flyer. I have burned a good number of G64's in one of these. My only complaint is that the fins seem to break on landing a lot. A bigger parachute would help, if you have the recovery area for it, or make sure you have really good fillets that are well built up along the root edge. Overall a wonderful flyer. I permanently reduced mine to a 29mm mount, to save on motors.

Aerotech SUMO 4'' Rocket Kit Mid Power Model Rocket Kit #89024

Aerotech Wart Hog Kit Mid Power Model Rocket Kit #89018

Aerotech HV Arcas Kit Mid Power Model Rocket Kit #89012

Aerotech Strong Arm Kit Mid Power Model Rocket Kit #89017

Aerotech Mustang Kit Mid Power Model Rocket Kit #89010

Aerotech G80-7T Blue Thunder Motor G Model Rocket Engine #78007

Aerotech Arreaux Kit Mid Power Model Rocket Kit #89013

Aerotech Initiator Rocket Kit Mid Power Model Rocket Kit #89011

Estes Big Daddy 'E' Model Rocket Kit Skill Level 2 #2162

Aerotech Barracuda Kit Mid Power Model Rocket Kit #89020

Aerotech Cheetah Kit Mid Power Model Rocket Kit #89016

Aerotech IQSY Tomahawk Kit Mid Power Model Rocket Kit #89014

Aerotech Mantis Launch Pad Model Rocket Launch Pad #89281

Estes Big Bertha Model Rocket Kit Skill Level 1 #1948

Estes Bull Pup 12D Model Rocket Kit Skill Level 2 #7000

Aerotech G80-10T Blue Thunder Motor G Model Rocket Engine #78010

Aerotech Reloadable Motor System 29/40-120 #91291

Aerotech F50-6T 29/98 Blue Thunder Motor F Composite Model Rocket Engine #65006

Aerotech Interlock Controller (Assembly required) Model Rocket Launch Supply #89381

Estes US Army Patriot M-104 Model Rocket Kit Skill Level 1 #2056

Estes Porta-Pad II Model Rocket Launch Pad #302215

Estes Mean Machine Model Rocket Kit Level 2 Model Rocket Kit #1295

Estes Electron Beam Model Rocket Launch Controller #302220

Aerotech G40-7W White Lightning Motor G Composite Model Rocket Engine #74007

Estes Hi-Flier Model Rocket Kit Skill Level 1 #2178

Aerotech Reloadable Motor System 24/40 #91241

Aerotech F20-4W Econojet Motor Single Use Motor (2) F Composite Model Rocket Engine #62004

Estes Baby Bertha Model Rocket Kit Skill Level 1 #1261

Quest Harpoon Model Rocket Kit Level 3 Model Rocket Kit #3008

Estes Ventris Model Rocket Kit Pro Series II Skill Level 5 #9701

Aerotech G40-4W White Lightning Motor G Composite Model Rocket Engine #74004

Aerotech Initiator Start Kit - Single Use Engines Model Rocket Kit Starter Set #89001

Estes E Model Rocket Launch Pad #2238

Estes Firehawk E2X Model Rocket Kit Easy To Assemble #0804

Quest Gamma Ray Model Rocket Kit Level 2 Model Rocket Kit #2004

Estes Alpha III E2X Model Rocket Kit Easy To Assemble #1256

Estes Wizard Model Rocket Kit Skill Level 1 #1292

Quest Superbird Model Rocket Kit Level 2 Model Rocket Kit #2010

Estes Blast Off Flight Pack (24) Standard Model Rocket Engine Bulk Pack Assortment #1672

Aerotech G64-7W 29/40-120 Reload Motor Kit G RMS Model Rocket Engine #76407

← Swipe To View More →

Features

-Flights approaching altitudes up to 1200 feet.
-Precision cut plywood components.
-Plastic nose cone.
-Parachute recovery.
-36 heavy duty parachute.
-This kit is recommended for those with previous model rocket building experience.

Specs

Length: 47.5"
Diameter: 4"
Weight: 29 oz.
Fins: Precision Cut Plywood
Recovery: Parachute
Max Altitude: 1200'
Motor Mount: 38mm
Stages: 1
LOC Product Number: PK48

Requirements & Suggestions

Rocket Engines:
F50-6 (ARO65006),
G80-7 (ARO78007)
Igniters (EST2303) (usually included with the engines)
Launch Pad (EST302215) (QUS7610)
Launch Controller
Sandpaper
Hobby Knife
Model Rocket Glue (TES3501) or Cement (HLC107)
How to Paint a Model Rocket
Sanding Sealer for fins
1/4" Masking Tape

Hobbylinc INSTA-CURE Gap Filling Cyanoacrylate 1oz Hobby CA Super Glue #107

Testors Plastic Cement Tube 5/8 oz Plastic Model Cement #3501

Hobbylinc QUICK CURE 5 Minute Epoxy (4 1/2oz) Hobby Epoxy #201

Du-bro Mix-It Stix (25)

Hobbylinc FINISH CURE 20 Minute Epoxy (4 1/2oz) Hobby Epoxy #209

Du-bro Epoxy Brushes (6)

Hobbylinc MAXI-CURE Extra Thick Cyanoacrylate 1/2oz Hobby CA Super Glue #111

Hobbylinc MID CURE 15 Minute Epoxy (9oz) Hobby Epoxy #204

Hobbylinc Insta-Flex Flexible Thin Cyanoacrylate Hobby CA Super Glue #119

Squadron Scribing Tool

Hobbylinc Extra Cyanoacrylate Tops CA Glue Tip Glue Applicator #312

Hobbylinc INSTA-CURE Super Thin Cyanoacrylate 1oz Hobby CA Super Glue #102

Testors Fast Wood Cement Plastic Model Cement #3503

Pacer Zip Kicker Pump 2 oz CA Super Glue Accelerator #pt715

Hobbylinc MAXI-CURE Extra Thick Cyanoacrylate 1oz Hobby CA Super Glue #112

X-acto No.1 Precision Knife (Cd)

Squadron Glue Applicator

Hobbylinc INSTA-CURE Gap Filling Cyanoacrylate 2oz Hobby CA Super Glue #108

Testors Spray High Gloss Clear 3 oz Hobby and Model Enamel Paint #1814

Hobbylinc SLOW CURE 30 Minute Epoxy (9oz) Hobby Epoxy #206

Hobbylinc Insta-Cure Pocket CA 4 oz. Super thin CA W/Pin in cap Hobby CA Super Glue #132

Hobbylinc MAXI-CURE Extra Thick Cyanoacrylate 2oz Hobby CA Super Glue #113

Badger Complete Head Assembly Large 150 Airbrush Accessory #50-0163

Squadron Seam Scraper

Pacer Zip-Kicker Refill 8 oz CA Super Glue Accelerator #pt29

Testors Spray Custom Red Metal Flake 3 oz Hobby and Model Enamel Paint #1629

Badger Head Washer Airbrush Accessory #50-055

Badger Large Needle 150/100 Airbrush Accessory #50-0403

Hobbylinc Extra Fine Extender Tips (6) Glue Tip Glue Applicator #302

Pacer Z-Poxy Finishing Resin 12 Ounce Hobby and Craft Fiberglass Resin #pt40

Testors Spray Flat White 3 oz Hobby and Model Enamel Paint #1258

← Swipe To View More →

Reviews

"good first 4 inch rocket"

georgerseijo (Davie, FL)

good quality and fit on all components, changed out the shock cord and epoxied an eye bolt to the nose cone base

"Easy to Build, Perfect Rocket for Level 1 HPR"

JPM (Mississippi)

I got my Level 1 Certification (NAR) with the LOC IV rocket. Used an Aerotech H123W-M. Drilled the delay to 8 seconds. Parachute deployed at Apogee. I used a larger 4' Rocketman Parachute so as to touch down easy with no damage to fins or tube. NOTE: The full 10 second delay cold have been used. As mentioned, make fillets on the fins for strength. The Center Of Gravity on mine is 28.6, measured from the nose cone. I have not tried a G motor yet. JP